Sorry but it's going to be nearly impossible to help without seeing the
layout, knowing the water supply values, systems type (wet/dry) and
configuration (tree/grid or ?), knowing pipe sizes tried, head spacings,
k-values, design criteria, and on and on and on........

 


Craig L. Prahl, CET
Fire Protection Group
Mechanical Department
CH2MHILL
Lockwood Greene
1500 International Drive
PO Box 491, Spartanburg, SC  29304-0491
Direct - 864.599.4102
Fax - 864.599.8439
[EMAIL PROTECTED]
http://www.lg.com



-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brian
Harris
Sent: Tuesday, February 19, 2008 8:04 AM
To: [email protected]
Subject: Delta Flows

I am working on a job and the calc's are kicking my butt! My most
demanding head has a delta flow of "0", which makes sense, but allot of
the other heads in the remote area are overflowing by up to 10! The calc
of course doesn't work, it's 40 pounds over, I've tried everything I
know. Any help would be appreciated.
 

Regards,

 
<http://www.firstdefensefire.com/>  

 

 



__________ NOD32 2886 (20080219) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email
to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to