Brian,

I apologize.  I wasn't trying to cut you down, I was merely making the
assumption that your owner or license holder must be out of the office or I
would not have offered to have you send the drawing to me and call you with
some assistance.  Many times the obvious answer is right in front of you but
it's difficult to see.  If you have another set of eyes looking at it that
will sometimes be all you need.

Like others said, we just didn't have enough info to make an educated guess
to help you.  Again, I apologize for offending you.

Cliff

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brian Harris
Sent: Tuesday, February 19, 2008 10:36 AM
To: [email protected]
Subject: RE: Delta Flows

Cliff,
Why are you so quick to cut somebody down? I thought this forum was here to
help each other. If you must know the individual that holds our license is
one of the most highly rated contractors in this industry, he is on vacation
and I don't think this is a life or death situation that warrants me
interrupting that. I just got a phone call from another highly qualified
forum member that agreed with my solution, thanks for your time.....


Brian Harris
FDFP INC.

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Cliff
Whitfield
Sent: Tuesday, February 19, 2008 11:01 AM
To: [email protected]
Subject: RE: Delta Flows

Brian,

Apparently the person in your office that is qualified to hold your
contractor's license is out of pocket or he could help you solve the
problem.  Contact me off-forum with a phone number where I can call you and
I will see if I can help.  If you can email me your dwg file, it will help
speed things up.

Cliff Whitfield, SET
Fire Design, Inc.

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Brian Harris
Sent: Tuesday, February 19, 2008 9:04 AM
To: [email protected]
Subject: Delta Flows

I am working on a job and the calc's are kicking my butt! My most demanding
head has a delta flow of "0", which makes sense, but allot of the other
heads in the remote area are overflowing by up to 10! The calc of course
doesn't work, it's 40 pounds over, I've tried everything I know. Any help
would be appreciated.
 

Regards,

 
<http://www.firstdefensefire.com/>  

 

 

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to