David 

Contact me off the forum list. I will what I can do for you.
[EMAIL PROTECTED]

G. Tim Stone


NICET Level III Engineering Technician
Fire Protection Sprinkler Design
and Consulting Services

117 Old Stage Rd. - Essex Jct., VT. 05452
TEL: (802) 434-2968          Fax: (802) 434-4343
                


> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:sprinklerforum-
> [EMAIL PROTECTED] On Behalf Of David Phelan
> Sent: Monday, April 07, 2008 1:15 PM
> To: [email protected]
> Subject: Dry Pipe Loss Help
> 
> Good afternoon to all,
> 
>   If someone on the list with a hydraulic calc program could do me the
> favor of calculating the friction loss over the following run it would
> help tremendously.  I have a 1920's circa mill complex that has endured
> some deferred maintenance and now tenant storage / commodity problems.
> The owners have come to the table and are now working with us (AHJ) to
> repair / resolve our concerns.  I'm just trying to estimate water delivery
> to the remote point so we can do some comparison with available flows on
> the property.
> 
>   I have calculated out the elevation losses from the city supply pressure
> and would like to know what kind of pipe friction loss I can expect to the
> remote area.  The system is now dry (was wet in 1920 but converted to dry
> around 1980) - a whole different story - and is using standard weight
> threaded pipe and fittings (pipe schedule no doubt).  I have 70 psi at
> base of riser and after elevation loss Im down to 46 psi.  Now factor in
> the following pipe run:
> 
>   45 feet of 6 inch + 35 feet of 4 inch + 15 feet of 2 1/2" + 10 feet of 1
> 1/2" + 10 feet of 1" to end of branch line.
> 
>   I dont have any programs to help me with that and would appreciate it
> someone could run that through for me so I can have the end head pressure.
> Thanks very much.
> 
>   Dave P.
>   An AHJ in NJ
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
> 
> To Unsubscribe, send an email to:[EMAIL PROTECTED]
> (Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to