Dave,

If G. Tim can't help you or you can't get in touch with him give me a call offline and I'll see if I can.

Best regards,
PARSLEY CONSULTING
Ken Wagoner, SET
760.745.6181 voice
760.745.0537 fax
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> e-mail
www.ParsleyConsulting.com <http://www.ParsleyConsulting.com> website



David Phelan wrote:
Good afternoon to all,
If someone on the list with a hydraulic calc program could do me the favor of calculating the friction loss over the following run it would help tremendously. I have a 1920's circa mill complex that has endured some deferred maintenance and now tenant storage / commodity problems. The owners have come to the table and are now working with us (AHJ) to repair / resolve our concerns. I'm just trying to estimate water delivery to the remote point so we can do some comparison with available flows on the property. I have calculated out the elevation losses from the city supply pressure and would like to know what kind of pipe friction loss I can expect to the remote area. The system is now dry (was wet in 1920 but converted to dry around 1980) - a whole different story - and is using standard weight threaded pipe and fittings (pipe schedule no doubt). I have 70 psi at base of riser and after elevation loss Im down to 46 psi. Now factor in the following pipe run: 45 feet of 6 inch + 35 feet of 4 inch + 15 feet of 2 1/2" + 10 feet of 1 1/2" + 10 feet of 1" to end of branch line. I dont have any programs to help me with that and would appreciate it someone could run that through for me so I can have the end head pressure. Thanks very much. Dave P.
  An AHJ in NJ
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)


_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to