We use quite a few of them on our 13D backflows which all seem to come with ball valves. We've also installed them at the owner request on the drum drip ball valves of dry systems. You need a slow close control valve for a sectional valve, to prevent water hammer, so these won't work, since 1/4 turn ball valves are anything but "Slow Close"
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Duross Sent: Wednesday, May 21, 2008 4:35 PM To: [email protected] Subject: RE: Sectional Valves... Actually Charles, it clamps to the valve body. Meant for a ball valve only, like when you have a listed bfp assembly with ball valves and they have to be monitored. Not cheap! They list for $225. Tom Go Red Sox! Hello RFI, Potter makes a switch that can be added to ball valves for this RBVS, BUT since it clamps to the pipe for mounting it might not be suitable for use with CPVC. _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
