headed your way via e-mail
Craig L. Prahl, CET Fire Protection Group Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [EMAIL PROTECTED] http://www.ch2m.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Duross Sent: Monday, August 18, 2008 8:22 AM To: [email protected] Subject: Viking H-1 Does anyone have a cut sheet or url link for information on an old 4" H-1 wet valve (variable pressure trim if applicable)? I suspect it's trimmed incorrectly. It's got a 3 way ball valve as a traditional alarm test line but it's also connected to the alarm tapping off the clapper port. I'd like to see what the factory trim was supposed to look like. You can b/c me or fax directly (617-524-7171). Thanks! Tom Duross Go Red Sox _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
