We are doing a project with a FM design. The tipping area is a dual density .80/1500 & .30/5000 and the processing area design is 12 K16.8 @ 63 psi. FM references Data Sheet 2-2.
Ron Fletcher Aero Automatic Phoenix, AZ -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ryan Peterson Sent: Friday, November 20, 2009 7:35 AM To: [email protected] Subject: Waste Transfer Stations Group We are currently looking at a waste transfer station. I cannot find any requirements for fire protection. Does anyone know if there are requirements out there? Thanks in advance Ryan Peterson Wayne Automatic Fire Sprinklers _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
