I was looking to save some time and not reinvent the wheel if someone else has already done the work. I can make one if need be, just looking to save some time.
Joe Burtell -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ron Greenman Sent: Tuesday, January 26, 2010 3:37 PM To: [email protected] Subject: Re: Dry Valve Pressure Set-Up Make one for each ratio. Excel is pretty simple. On Tue, Jan 26, 2010 at 2:26 PM, Joe Burtell <[email protected]> wrote: > Does anyone out there have a handy excel file that would automatically > calculate the air maintenance device cut-in, cut-out and the PS-40 > high and low settings based on the static pressure plugged into the formula? > > Best regards, > > Joe Burtell, SET, CFPS > Burtell Fire Protection > Phone: 406.652.7697 > Fax: 406.652.7743 > Cell: 406.861.4507 > Email: [email protected] > Web Site: http://www.burtellfire.com > Please consider the environment before printing this email > > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email > to:[email protected] > (Put the word unsubscribe in the subject field) > -- Ron Greenman Instructor Fire Protection Engineering Bates Technical College Tacoma, WA Member: SFPE, ASCET, NFPA, AFSA, NFSA AFAA, WSAFM _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
