-------------------------- Sent from my BlackBerry Wireless Handheld This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive this message for the addressee), you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received this message in error, please advise the sender by reply e-mail and delete the message. Thank you.
-----Original Message----- From: [email protected] <[email protected]> To: [email protected] <[email protected]> Sent: Tue Jan 26 17:54:10 2010 Subject: RE: Dry Valve Pressure Set-Up We don't have one for either Joe or I would send it to you. Sounds like a good idea however! Rod DiBona Rapid Fire ________________________________________ From: [email protected] [[email protected]] On Behalf Of Joe Burtell [[email protected]] Sent: Tuesday, January 26, 2010 3:39 PM To: [email protected] Subject: RE: Dry Valve Pressure Set-Up I was looking to save some time and not reinvent the wheel if someone else has already done the work. I can make one if need be, just looking to save some time. Joe Burtell -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ron Greenman Sent: Tuesday, January 26, 2010 3:37 PM To: [email protected] Subject: Re: Dry Valve Pressure Set-Up Make one for each ratio. Excel is pretty simple. On Tue, Jan 26, 2010 at 2:26 PM, Joe Burtell <[email protected]> wrote: > Does anyone out there have a handy excel file that would automatically > calculate the air maintenance device cut-in, cut-out and the PS-40 > high and low settings based on the static pressure plugged into the formula? > > Best regards, > > Joe Burtell, SET, CFPS > Burtell Fire Protection > Phone: 406.652.7697 > Fax: 406.652.7743 > Cell: 406.861.4507 > Email: [email protected] > Web Site: http://www.burtellfire.com > Please consider the environment before printing this email > > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email > to:[email protected] > (Put the word unsubscribe in the subject field) > -- Ron Greenman Instructor Fire Protection Engineering Bates Technical College Tacoma, WA Member: SFPE, ASCET, NFPA, AFSA, NFSA AFAA, WSAFM _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
