That's the way I was taught and have practiced as long as I remember. Lamar V.
---- Todd Williams <[email protected]> wrote: > So if you back out the drop with the sprinkler on it and don't touch > the sprinkler, it is OK to put it back? > > > At 10:45 AM 2/24/2010, you wrote: > >Good point. The way I look at the intent is IF you put a wrench on > >the sprinkler, it's a good idea to replace it. > > > >Roland > > > >On Feb 24, 2010, at 4:37 AM, <[email protected]> wrote: > > > > > All the AHJ's in my area (Atlanta) have always accepted the > > > relocation of an existing sprinkler as long as you don't remove it > > > from the fitting to which it is attached. > > > > > > Lamar Vaughn > > > Vaughn & Company > > > > > > >_______________________________________________ > >Sprinklerforum mailing list > >[email protected] > >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > > >For Technical Assistance, send an email to: [email protected] > > > >To Unsubscribe, send an email to:[email protected] > >(Put the word unsubscribe in the subject field) > > Todd G. Williams, PE > Fire Protection Design/Consulting > Stonington, Connecticut > www.fpdc.com > 860.535.2080 > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > > For Technical Assistance, send an email to: [email protected] > > To Unsubscribe, send an email to:[email protected] > (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
