We are currently in the process of protecting both. If the owner would
put sheetrock or metal where they first overlap it would not be a
question and protection would not be required, the only logical reason
for putting heads in this particular space would be so heat doesn't fill
the void and delay operation of the other heads. There is nothing to
protect otherwise.
On 10/26/2010 4:04 PM, Roland Huggins wrote:
As a starting point is the old building sprinklered? Considering that
both structures likely constitute a SINGLE building such things have
to be considered.
Roland
On Oct 26, 2010, at 12:17 PM, Greg McGahan wrote:
We have a new metal building that is being built such that the roof
overlaps an existing metal roof therefore leaving an uninhabited,
non-combustible, triangular shaped space that is open to the interior
of the new building. This space is approximately 30' in depth, about
3' high where the overlap starts and goes to 0" eventually where the
roofs actually meet.
What do we do?
Thanks,
Greg
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email
to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
--
Greg C. McGahan Living Water Fire Protection, LLC. 1160 McKenzie Road
Cantonment, FL 32533 850-937-1850 Fax 850-937-1852
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
For Technical Assistance, send an email to: [email protected]
To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
