Bill,

Have you looked at 12.1.3.4.1 and A12.1.3.4.1? I have always been under the 
assumption that 20 feet clear above the top of storage was the max.

Ron Fletcher
Aero Automatic
Phoenix, AZ

-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Bill Brooks
Sent: Wednesday, February 16, 2011 6:42 PM
To: [email protected]
Subject: Rack Storage Sanity Check (13-2010)

Figure 17.2.1.2.1(d) shows my situation - Group A plastics, four tier double
row racks, but 23 (twenty three) ft ceiling clearance.  I'm assuming one
level of in-racks below the top tier is necessary based on 12.1.3.4.4, with
in-racks spaced at 5 ft based on bottom right Figure 17.2.1.2.1(d). 

If this is an acceptable arrangement it looks like the Group A plastic
protection could be less demanding than encapsulated Class IV for this
configuration if you discount the differences in the spacing of the in-racks
for each case.  Is this because the encapsulated Class IV commodities can be
a greater fire hazard than the cartoned (or exposed unexpanded) plastics?

Am I missing something really big with respect to ceiling clearance and
Group A plastics?  I know you just can't do ESFR when ceilings are too high,
but are Group A plastics similar?

Bill Brooks

William N. Brooks, P.E.
Brooks Fire Protection Engineering Inc.
372 Wilett Drive
Severna Park, MD 21146-1904
410-544-3620
410-544-3032 FAX
412-400-6528 Cell


_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to