Sure Rod, thank you, glad you enjoyed it. Happy Holidays!
 
-----Original Message-----
From: Rod DiBona [mailto:[email protected]] 
Sent: Sunday, February 20, 2011 2:35 PM
To: [email protected]
Subject: RE: 'seeing' heat release rate

LOL. You make me laugh. Well I will say I will be looking at hazard
classification at Christmas much differently now. Thanks. I found it fun.

Rod DiBona
Rapid Fire

________________________________________
From: [email protected]
[[email protected]] On Behalf Of Brad Casterline
[[email protected]]
Sent: Sunday, February 20, 2011 12:39 PM
To: [email protected]
Subject: 'seeing' heat release rate

A while back I was going to post the question 'does anybody know the numbers
that go with the text in 13- low, moderate and high heat release rate?' I am
an Eng. Tech., and so only responsible for applying 13, not writing it, but
being from the 'Show Me State', I would have had to 'see' the numbers
anyway, and so decided to take a shot at them on my own. I wanted to share
what I came up with. I like being right, but I love being corrected if Ii am
not, so..., please, anyone. For a Burning Unit, I see a big dry Christmas
tree, either standing on the floor, or stuffed in to a one cubic foot box
weighing 33 pounds. I call them both 'tree'. How hot is a Light Hazard fire?
If you throw a tree on it, the tree would be gone in 16 seconds. There are
114 trees per 1500 square feet~~ 13 square feet per tree. The next time I
max out an EC head in LH, I will see 30 trees under it, so I will make sure
to get enough water to it! For Heat of Combustion I used 22,500 kilo-joules
per kilo-gram (fire power). For the amount of water required to keep the
power of the fire in check, for LH, I used .1/1500 for 30 minutes, with Heat
of Vaporization for water of 2257 kilo-joules per kilo-gram. How hot is an
Ordinary Hazard Group 2 fire? If you threw a tree on it, the tree would be
gone in 8 seconds. There are 228 trees per 1500 square feet~~6.5 square feet
per tree. The numbers for OH1 fall right between LH and OH2. Based on all
this, I now think Low Heat Release Rate means a 2.1 Megawatt fire, and a
Moderate Heat Release Rate means a 4.2 Megawatt fire. If I am in the
ballpark, I am 2/3 of the way to knowing the number for High Heat Release
Rate.



ps- if you are aggravated bcoz this post stuffed your phone at Sunday brunch
I owe u an apology: i'm sorry ur so touchy :-)

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to