They want to see water flowing backwards. It's probably more of a convention than anything; the results should be the same.
(Worth, always include a subject in a post) At 09:40 AM 3/25/2011, you wrote: >What is the difference when performing hydraulic calculations from point of >service to most remote area, compared to most remote area to point of service? >(NFPA 13 CH 14.4.4.4.5) > >Worth Anderson > > > >This e-mail transmission contains information that is intended to be >confidential and privileged. If you receive this e-mail and you are not a >named addressee you are hereby notified that you are not authorized to read, >print, retain, copy or disseminate this communication without the consent of >the sender and that doing so is prohibited and may be unlawful. Please reply >to the message immediately by informing the sender that the message was >misdirected. After replying, please delete and otherwise erase it and any >attachments from your computer system. Your assistance in correcting this >error is appreciated. >_______________________________________________ >Sprinklerforum mailing list >[email protected] >http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum > >For Technical Assistance, send an email to: [email protected] > >To Unsubscribe, send an email to:[email protected] >(Put the word unsubscribe in the subject field) Todd G. Williams, PE Fire Protection Design/Consulting Stonington, CT 860.535.2080 www.fpdc.com _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
