>From my fire protection plan view and building technical report experiences,
fire protection, OSHPAD is one organization
that could be eliminated to the benefit of the CA taxpayer,
.

In the very least, this publicly funded organization should
have EVERY ONE of its reviews and one-off decisions
published to a public website.   Think of it as, when a building
plan decision and/or judgment are rendered from an OSHPAD
fire protection desk, that decision is automatically blogged
to a website.   Consumer organizations could then read for
themselves the caliber of common sense and the degree of
safety this layer is adding to the fire protection design.

Transparency in the decision process, and equal access to
information are not difficult technological challenges.   I am
not saying plan reviewers need regurgitate Code prescriptions;
Quite the opposite, they can most valuable at interpreting Code intent.
It is that process of interpreting fairly and justly that we
might improve on.  We could and should take example from others
who have recently shed blood and given lives for these qualities.

scot deal
excelsior fire



 learning from the bloody examples that people are having to
fight for elsewher



On Tue, May 3, 2011 at 2:10 AM, Ronl.Fletcher <[email protected]>wrote:

> I am not that familiar with ASCE 7 does it require all ceiling systems to
> be braced? We are running into AHJ's (OSHPAD) that say we can only use the
> Globe head because it is the only head and plate listed for seismic or
> something to that effect. What Mr. Greenman says about everything being
> braced to the same structure makes the most sense so OSHPAD will probably
> immediately reject that. We have to stop making sense.
>
> Ron Fletcher
> Aero Automatic
> Phoenix, AZ
>
> -----Original Message-----
> From: [email protected] [mailto:
> [email protected]] On Behalf Of Ron Greenman
> Sent: Monday, May 02, 2011 2:07 PM
> To: [email protected]
> Subject: Re: Oversized rings
>
> Why do we always need to come up with the solution to the building owner's
> problem? We, out hand, brace the system to the building so that they move
> in
> concert. If the ceiling is also braced then all would move together and so
> the problem would rest with whoever is responsible for the ceiling. If the
> issue is that the long drop may move differentially to the movement of
> building/ceiling/system that would be due to an inertial lag (cool
> phrase-can I coin it?) at the end of the drop and so your solution  should
> work. That said I think you'd need an awfully long rigid drop before you'd
> have enough sway in the pipe to be an issue. Of course everything I said
> may
> be....
>
> On Mon, May 2, 2011 at 1:53 PM, Steve Leyton <[email protected]
> >wrote:
>
> > IMNSHO, you would have to use a flexible hose connection to conform.
> > ASCE 7, 13.5.6.2.2.e states that except where rigid braces are used to
> > limit lateral deflection, you have to either provide a 2" oversize
> > clearance ring or a swing joint with 1" omnidirectional movement.   A
> > gooseneck is not such a swing joint.
> >
> > Has anyone yet considered whether 4-way splay wiring a drop to the
> > ceiling system would satisfy the requirement for rigid bracing?
> > Tension braces are allowed for EQB's - would this be an viable
> > alternative?
> >
> >
> > Steve
> >
> >
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]] On Behalf Of Chuck
> > Hamilton
> > Sent: Monday, May 02, 2011 1:28 PM
> > To: [email protected]
> > Subject: Oversized rings
> >
> > Per LADBS Informational Bulletin / Public Building Code, Document No.
> > P/BC
> > 2008-040, Effective 01-01-2008,
> > C.
> >   9.  Sprinkler heads and other penetrations:  All sprinkler heads
> > (drops)
> > except floor-ceiling or roof-ceiling
> >       fire-resistive assemblies and other penetrations, shall have a 2
> > inch
> > oversize ring, sleeve or adaptor through
> >       the ceiling tile to allow for free movement of at least 1 inch in
> > all
> > horizontal directions. Alternatively, a swing
> >       joint that can accommodate 1 inch of ceiling movement in all
> > horizontal directions is permitted to be provided at
> >       the top of the sprinkler head extension.
> >
> > My question is: does a gooseneck within 6" of the drop accommodate this
> > requirement or would this have to be a "Flex-Drop",
> > or "Aqua-Flex-Drop", to be able to avoid using the oversized escutheons.
> >
> > The gooseneck would not really allow much movement, and for sure it
> > wouldn't
> > move 1 inch in all horizontal directions.
> > I was just not sure what they mean by the term "swing joint".
> >
> > Chuck Hamilton
> > Pacific Fire Suppression, Inc.
> > 1642 So. Clementine St.
> > Anaheim, CA 92802
> > Ph. 714-502-0211 ext. 102
> > Fax 714-502-0214
> > e-mail: [email protected]
> >
> >
> >
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]] On Behalf Of
> > [email protected]
> > Sent: Thursday, April 21, 2011 4:15 PM
> > To: [email protected]
> > Subject: Sprinklerforum Digest, Vol 21, Issue 16
> >
> > Send Sprinklerforum mailing list submissions to
> >        [email protected]
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >
> > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
> > or, via email, send a message with subject or body 'help' to
> >        [email protected]
> >
> > You can reach the person managing the list at
> >        [email protected]
> >
> > When replying, please edit your Subject line so it is more specific than
> > "Re: Contents of Sprinklerforum digest..."
> >
> >
> >
> > __________ Information from ESET NOD32 Antivirus, version of virus
> > signature
> > database 6062 (20110421) __________
> >
> > The message was checked by ESET NOD32 Antivirus.
> >
> > http://www.eset.com
> >
> >
> > _______________________________________________
> > Sprinklerforum mailing list
> > [email protected]
> > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
> >
> > For Technical Assistance, send an email to: [email protected]
> >
> > To Unsubscribe, send an email
> > to:[email protected]
> > (Put the word unsubscribe in the subject field)
> > _______________________________________________
> > Sprinklerforum mailing list
> > [email protected]
> > http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
> >
> > For Technical Assistance, send an email to: [email protected]
> >
> > To Unsubscribe, send an email
> to:[email protected]
> > (Put the word unsubscribe in the subject field)
> >
>
>
>
> --
> Ron Greenman
> Instructor
> Fire Protection Engineering Technology
> Bates Technical College
> 1101 So. Yakima Ave.
> Tacoma, WA 98405
>
> [email protected]
>
> http://www.bates.ctc.edu/fireprotection/
>
> 253.680.7346
> 253.576.9700 (cell)
>
> Member:
> ASEE, SFPE, ASCET, NFPA, AFSA, NFSA, AFAA, NIBS, WSAFM, WFC
>
> They are happy men whose natures sort with their vocations. -Francis Bacon,
> essayist, philosopher, and statesman (1561-1626)
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>
> For Technical Assistance, send an email to: [email protected]
>
> To Unsubscribe, send an email to:[email protected]
> (Put the word unsubscribe in the subject field)
>
>
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
>
> For Technical Assistance, send an email to: [email protected]
>
> To Unsubscribe, send an email to:[email protected]
> (Put the word unsubscribe in the subject field)
>
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to