Pete, We did eight dry pipe systems for a marina near Nashville in 2009. Dry pipe valve houses were on shore, and we fed to the docks with stainless steel braided hose lines manufactured by Nashville Rubber and Gasket, 1900 Elm Tree Drive, Nashville TN. 615-883-0030. They even provided grooved ends for us. I believe the lengths were 6 to 8 feet each, but that may be best determined by your maximum and minimum water elevations. John O'Connor National Fire Sprinklers, Inc.
-----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Pete Schwab Sent: Thursday, October 30, 2014 8:37 AM To: [email protected] Subject: Floating Docks Forum We have a project with a fixed dock connected to a floating dock. We need to install a hose connection on the floating dock. NFPA 303 allows flexible connections where approved by the AHJ. I am not sure that the Metraflex Connector will work for the 3-4 feet of tide variation. Does anyone have any suggestions? Thanks Peter Schwab VP of Purchasing & Engineering Technologies Wayne Automatic Fire Sprinklers Inc. 222 Capitol Court Ocoee, Fl 34761 Mobile: (407) 468-8248 Direct: (407) 877-5570 Fax: (407) 656-8026 _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
