Could you have a 200 lb fitter with 50 lbs of tools in her belt jump up and
down on it, to see if it holds?

Seriously, some sort of reasonable pull-out test might satisfy.

-----Original Message-----
From: Sprinklerforum [mailto:[email protected]]
On Behalf Of Steve Sorrell
Sent: Wednesday, April 22, 2015 8:10 AM
To: [email protected]
Subject: RE: Steel brackets

Just a casual concern

Stephen J. Sorrell, CET
NICET# 77901 Level III
E mail: [email protected]

Performance Fire Protection, LLC
Corporate Office
179 Gasoline Alley -  PO Box 4510
Mooresville, NC 28117
Phone: 704-663-1664  Fax: 704-663-1652
Cell : 704-309-1242 

Web: www.performancefire.com
Licensed in NC, SC, VA, TN, GA, AL

"Performance on Every Level."


-----Original Message-----
From: Sprinklerforum [mailto:[email protected]]
On Behalf Of Matt Grise
Sent: Wednesday, April 22, 2015 9:07 AM
To: [email protected]
Subject: RE: Steel brackets

Is the inspector basing the concern off of any particular code section? Did
they provide a specific write up - or is this just a casual concern?

Matt Grisé PE*, LEED AP, NICET II  
Sales Engineer 
Alliance Fire Protection 
130 w 9th Ave.
North Kansas City, MO 64116

*Licensed in KS & MO 
 
913.888.0647 ph 
913.888.0618 f 
913.927.0222 cell 
www. AFPsprink.com 
 


-----Original Message-----
From: Sprinklerforum [mailto:[email protected]]
On Behalf Of Steve Sorrell
Sent: Wednesday, April 22, 2015 7:58 AM
To: [email protected]
Subject: RE: Steel brackets

Its manufactured.

Stephen J. Sorrell, CET
NICET# 77901 Level III
E mail: [email protected]

Performance Fire Protection, LLC
Corporate Office
179 Gasoline Alley -  PO Box 4510
Mooresville, NC 28117
Phone: 704-663-1664  Fax: 704-663-1652
Cell : 704-309-1242 

Web: www.performancefire.com
Licensed in NC, SC, VA, TN, GA, AL

"Performance on Every Level."

-----Original Message-----
From: Sprinklerforum [mailto:[email protected]]
On Behalf Of Richard Carr
Sent: Wednesday, April 22, 2015 8:52 AM
To: [email protected]
Subject: RE: Steel brackets

Do you make one or use a manufactured one?

Richard Carr, SET
Branch Manager
Cox Fire Protection, Inc
6555 Grace Lane.
Jacksonville, Fl. 32205
[email protected]
904-781-8227


-----Original Message-----
From: Sprinklerforum [mailto:[email protected]]
On Behalf Of Steve Sorrell
Sent: Wednesday, April 22, 2015 8:21 AM
To: [email protected]
Subject: Steel brackets

We have a third party inspector who is questioning the use of L brackets
that we had to use to hang our piping off from a CMU block wall.
I cannot find any mention of hanging off from building walls, only hanging
from building structure in NFPA-13.
Any help would be appreciated.


Stephen J. Sorrell, CET
NICET# 77901 Level III
E mail: [email protected]<mailto:[email protected]>

Performance Fire Protection, LLC
Corporate Office
179 Gasoline Alley -  PO Box 4510
Mooresville, NC 28117
Phone: 704-663-1664  Fax: 704-663-1652
Cell : 704-309-1242

Web: www.performancefire.com<http://www.performancefire.com>
Licensed in NC, SC, VA, TN, GA, AL

"Performance on Every Level."

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to