Spears makes it, I have a cut sheet if you need it. Richard Carr, SET Branch Manager Cox Fire Protection, Inc 6555 Grace Lane. Jacksonville, Fl. 32205 [email protected] 904-781-8227
-----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Richard Carr Sent: Friday, March 18, 2016 2:35 PM To: [email protected] Subject: RE: cpvc sharkbite style fittings? FlameGuard GripLoc coupling but only in 3/4 and 1". It is a repair coupling, no glue needed. Richard Carr, SET Branch Manager Cox Fire Protection, Inc 6555 Grace Lane. Jacksonville, Fl. 32205 [email protected] 904-781-8227 -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Tony Eggster Sent: Friday, March 18, 2016 2:32 PM To: [email protected] Subject: cpvc sharkbite style fittings? Hello all, I had someone tell me there are shark-bite style fittings out there that are listed for fire sprinkler use. I've been searching but have failed to find any. We have a need for fittings that can be utilized immediately without having to wait for glue to cure. Any direction is appreciated. Thanks, Tony _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
