AquaTherm has a plastic material that is joined by heat fusion. It is FM approved only though (not UL). It is ready to go pretty quickly after install.
Not the cheapest product out there. Matt Grisé PE*, LEED AP, NICET II Sales Engineer Alliance Fire Protection 130 w 9th Ave. North Kansas City, MO 64116 *Licensed in KS & MO 913.888.0647 ph 913.888.0618 f 913.526.7443 cell www. AFPsprink.com -----Original Message----- From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Tony Eggster Sent: Friday, March 18, 2016 1:32 PM To: sprinklerforum@lists.firesprinkler.org Subject: cpvc sharkbite style fittings? Hello all, I had someone tell me there are shark-bite style fittings out there that are listed for fire sprinkler use. I've been searching but have failed to find any. We have a need for fittings that can be utilized immediately without having to wait for glue to cure. Any direction is appreciated. Thanks, Tony _______________________________________________ Sprinklerforum mailing list Sprinklerforum@lists.firesprinkler.org http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list Sprinklerforum@lists.firesprinkler.org http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org