Mentoring/Training I want to demonstrate by way of an example test how each residual pressure/flow rate point will fall on the same graphed line on the n1.85 chart.
Thank you, J. Scott Mitchell, PE Senior Fire Protection Engineer Mission Engineering CNS PTX / Y-12 | 865-576-5258 From: Sprinklerforum [mailto:[email protected]] On Behalf Of Skyler Bilbo via Sprinklerforum Sent: Wednesday, August 28, 2019 10:03 AM To: [email protected] Cc: Skyler Bilbo <[email protected]> Subject: Re: Water supply test data A fire pump flow test would typically have this information. You could just look at the inlet pressure and the flow. The backflow preventer might complicate things slightly. It would be helpful to know why you need this information. Thanks, Skyler Bilbo On Wed, Aug 28, 2019 at 8:52 AM Mitchell, Scott via Sprinklerforum <[email protected]<mailto:[email protected]>> wrote: Does anyone happen to have records of a single water supply test in which multiple residual pressures were recorded at multiple flow rates – for example, where additional outlets or hydrants are used after the initial flow rate and residual pressure are captured? Any help is appreciated. Thank you, J. Scott Mitchell, PE Senior Fire Protection Engineer Mission Engineering CNS PTX / Y-12 | 865-576-5258 _______________________________________________ Sprinklerforum mailing list [email protected]<mailto:[email protected]> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
