digimaster wrote:
> A NEW BETA RELEASE FOR QLOGITECHMEDIASERVER, WITH SUPPORT FOR
> ARCHITECTURE X86/I686.
> CHANGE SOME MINOR THING ON INSTALLATION AND INIT-SCRIPT.
> ON QTS 4.2 WITH X86_64 WITH A MIXED OF ELF32/ELF64 ENVIRONMENT, THE FILE
> /LIB/LD-LINUX.SO.2 IS NEEDED TO MAKE PERL WORK.
> SO PLEASE CHECK IF IT EXIST BEFORE INSTALLING IT.
>
> ALSO PLEASE REMOVE ANY OLD LMS/SSOTS AND MAKE SURE THERE IS NO OTHER
> PERL ACTIEVE ON YOUŕE QNAP.
> BEFORE UNINSTALLING MAKE A BACK OF YOU'RE LMS CACHE AND PREFS DIRECTORY
> ON A SAVE PLACE.
>
> THEN INSTALL SUPPLIED PACKET THROUGH THE QNAP APPSTORE MANUELLY.
> IT WILL TAKE A FEW MINUTS, AND GIVE SOME MESSAGES.
> IF ALL GOES CORRECTLY, IT WILL INSTALL A WORKING QLOGITECHMEDIASERVER.
> TEST IS BY LOGON TO SSH SHELL AND DO [ CD
> /SHARE/*/.QPKG/LOGITECHMEDIASERVER ], AND [ ./LOGITECHMEDIASERVER.SH
> STATUS ].
> THIS SHOULD TELL YOU IT RUNNING AND GIVE THE PID NUMBER.
> THEN DO CAT .PERL/PERL-VERSION, WHERE IT SHOULD SAY PERL-I686
> IF IT SAYS RUNNING ON THE STATUS COMMAND, DON DO ANY THING ELSE THERE
> COULD ERROR MESSAGES WHICH YOU CAN IGNORE !
>
> KEEP IN MIND ONLY FOR TESTING US, SO DON'T UPGRADED A EXISTING
> QLOGITECHMEDIASERVER.
> IF YOU'RE QLOGITECHMEDIASERVER WORKS, DON'T INSTALL THIS VERSION !
> THIS VERSION IS THE SAME AS V1.05A, ONLY A X86/I686 PERL IS ADDED.
>
> 'QLOGITECHMEDIASERVER V106.C BETA FOR QNAP QTS 4.2 AND HIGHER'
> (HTTPS://GOO.GL/SBUOTF)
>
> FOR OTHER WITH A QNAP X86_64 ( QTS 4.2 ), X86 AND I686, WHERE THE V1.05A
> DID NOT START CAN TRY THIS VERSION.
> CHECK IF /LIB/LD-LINUX.SO.2 EXIST, AS PERL NEEDS IT TO WORK.
>
> IF IT WORK PLEASE LET ME KNOW, AND PLEASE TELL ME YOU'RE ARCHITECTURE
> AND MODELNUMBER AND QTS VERSION, SO I CAN GET A GOOD IDEA.
>
>
I started by uninstalling previous QLMS, checking the no such directory
was left under .qpkg
I renamed .qpkg/Optware to foo.Optware ( I think Optware was installed
by Perl QPKG a longtime ago)
I made a system reboot
I did a manuall install of your latset 1.06C version
Same as before...
Code:
--------------------
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh status
LogitechMediaServer is not running, do ./LogitechMediaServer.sh start to
start services !
--------------------
No difference...
Code:
--------------------
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # chmod -R 0755 SlimServer/
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # chown -R admin SlimServer/
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh restart
LogitechMediaServer was already stopped !
Something went wrong, check youre configuration. try do
./LogitechMediaServer.sh failsafe or reinstall QPKG!
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ./LogitechMediaServer.sh status
LogitechMediaServer is not running, do ./LogitechMediaServer.sh start to
start services !
--------------------
Is this an older version? you mention ld-2.25.so
Code:
--------------------
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ls -l /lib/ld-linux.so.2
lrwxrwxrwx 1 admin administ 11 Dec 8 05:26 /lib/ld-linux.so.2
-> ld-2.6.1.so*
--------------------
perl seem to run?
Code:
--------------------
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ln -sf
/share/MD0_DATA/.qpkg/LogitechMediaServer/.Perl/perl /usr/local/
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # ln -sf
/share/MD0_DATA/.qpkg/LogitechMediaServer/.Perl/perl/bin/perl /usr/bin/
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # perl -V
Summary of my perl5 (revision 5 version 24 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.22-14-server, archname=i686-linux-thread-multi
uname='linux nasx86builder 2.6.22-14-server #1 smp sun oct 14 23:34:23 gmt
2007 i686 gnulinux '
config_args='-des -Dprefix=/usr/local/perl -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe
-fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.1.3 20070929 (prerelease) (Ubuntu
4.1.2-16ubuntu2)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234, doublekind=3
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12,
longdblkind=3
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib /lib /usr/lib64
libs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc
libc=libc-2.6.1.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.6.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: HAS_TIMES MULTIPLICITY PERLIO_LAYERS
PERL_COPY_ON_WRITE PERL_DONT_CREATE_GVSV
PERL_HASH_FUNC_ONE_AT_A_TIME_HARD
PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP
PERL_PRESERVE_IVUV USE_ITHREADS USE_LARGE_FILES
USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE
USE_LOCALE_NUMERIC USE_LOCALE_TIME USE_PERLIO
USE_PERL_ATOF USE_REENTRANT_API
Built under linux
Compiled at Dec 27 2017 08:58:16
@INC:
/usr/local/perl/lib/site_perl/5.24.0/i686-linux-thread-multi
/usr/local/perl/lib/site_perl/5.24.0
/usr/local/perl/lib/5.24.0/i686-linux-thread-multi
/usr/local/perl/lib/5.24.0
.
--------------------
Is this the app that I see in appcenter?
Code:
--------------------
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # /bin/pidof slimserver.pl
23195
--------------------
What about this? it is not perl-i686 but perl-1686 !!
Code:
--------------------
[/share/MD0_DATA/.qpkg/LogitechMediaServer] # cat .Perl/perl-version
perl-1686
--------------------
NAS: QNAP TS-459U+ -QTS 4.2.6- (4x 2TB, RAID5)
Services: LMS- 7.9.1 -, SSOTS- 4.14-
Squeezebox: 6x Reciever, 3x Boom, 2x SB3 Classic
Other: iPeng on iPad and iPhone
------------------------------------------------------------------------
jasell's Profile: http://forums.slimdevices.com/member.php?userid=17817
View this thread: http://forums.slimdevices.com/showthread.php?t=108292
_______________________________________________
Squeezecenter mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/squeezecenter
