garym wrote: > I saw a similar post in the last few months regarding media count not > matching and how to figure out differences with the database, but I > can't locate it now. Here's my issue. > > Short version: The number of files scanned *and* the total number of > tracks is 31 fewer on the newly setup rPi3B+ as compared with existing > rPi4B running same version of LMS. Both running current PcP 7.0.1 and > LMS 8.1.2. _Scanner_logs_have_no_errors_noted._ And swapping out the two > USB HDDs between the two rPis doesn't change anything. (Both USB HDDs > are WD spinning drive, USB 3.0 portable 4TB.) Based on library > statistic numbers, it seems two albums by two different artists are > missing in the rPi3B+ (total of 31 tracks). Details below. > > _ANY_THOUGHTS_(OR_LINKS_TO_OTHER_THREADS)_ON_HOW_TO_TRACK_DOWN_WHAT_IS_DIFFERENT?__THANKS. > _ > Details: > > I setup an rPi3B+ with DAC hat today from scratch with LMS and > squeezelite running. PcP 7.0.1 (32bit). Running LMS 8.1.2 > > _*With_rPi3B+_and_attached_USB_drive_and_\"clear_library_and_rescan_everything\"_I_get_the_following_results. > > *_34326 > > _WITH_RPI4B_RUNNING_PCP_7.0.1_(64_BIT)_AND_A_*DIFFERENT*_USB_DRIVE_(WITH_IDENTICAL_FILES_AS_THE_OTHER_USB_DRIVE)_AND_LMS_8.1.2,_I_GET_THE_FOLLOWING_RESULTS_FROM_A_CLEAR_AND_RESCAN. > _ > 34327 > > > Also note, that with either of the USB HDDs (the one attached to the > rPi3B+ or the one attached to rPi4B), I get a track count of 116,509 > when connected to my PC and scanned with foobar2000. And even more > mysterious, if I switch out the USB HDDs and connect the one from the > rPi4B instead to the rPi3B+, I still get the same 31 lower track count. > And if I connect the orginal rPi3B+ USB drive to the rPi4B, I get the > correct 116,509 track count. So the USB drives have identical > files/folders (and even byte count when I look at the properties of the > music directory on each). > > It's a mystery! > > p.s. on a more positive note, notice the scan time difference between > the rPi4B (piCorePlayer 64bit), with USB HD connected to USB 3.0 port, 1 > hour, 17 minutes, vs the rPi3B+ (piCorePlayer 32bit), 3 hours and 2 > minutes.
It was a post by me before but its not the same issue. I had Qobuz OMLI set up and one of the two LMS had this ticked and other didn't 34331 In your case I would suggest a permissions issue where one Pi can see the files and other can't? +-------------------------------------------------------------------+ |Filename: 2021-04-23 11_49_33-Server Settings.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=34331| +-------------------------------------------------------------------+ VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s *Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s *Dining Room* SB Boom *Kitchen* UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* Pi Zero+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV) & Bathroom* SB Touch ->Denon AVR ->Mordaunt Short M10s + Kef ceiling speakers *Guest Room* Joggler > Topping Amp -> Wharfedale Modus Cubes Everything controlled by iPeng & Material on iOS ------------------------------------------------------------------------ d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=114437 _______________________________________________ Squeezecenter mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/squeezecenter
