Henrik, This fixed it. Thanks so much for you help and patience.
John > You may need to run "make distclean" or remove config.cache to reset > configures opinion on the state of your system when changing configure > parameters or adding/removing dependent system components such as > OpenSSL. > > With these header locations you should either not specify a argument to > --with-openssl (or not specify the option at all), or use > --with-openssl=/usr/local/src/openssl-0.9.7 > > --with-openssl=/usr/include/openssl is NOT correct. See earlier message > in this thread for why. > > Regards > Henrik > > ons 2003-02-19 klockan 15.10 skrev John Peak: >> Okay I have done some cleaning up of my system. Sorry for any >> confusion. >> >> I have OpenSSL headers including md5.h in the following directories: >> /usr/include/openssl >> /usr/local/src/openssl-0.9.7/include/openssl >> >> Performing "make install" fails after creating the following >> configurations: ./configure --enable-ssl >> --with-openssl=/usr/include/openssl >> ./configure --enable-ssl --with-openssl/usr/local/src/openssl-0.9.7 >> >> It's always the same think: >> ../include/md5.h:18: #error Cannot find OpenSSL headers >> >> Thanks again for the help! >> >> Regards, >> John >> >> > On Tuesday 18 February 2003 22.28, John Peak wrote: >> >> Sorry. I have tried that as well. >> >> >> >> This should work as long as md5.h and the other headers are in the >> /usr/local/include/openssl/include directory, correct?! Thanks. >> > >> > >> > Your OpenSSL md5.h file in in /usr/local/include/openssl/md5.h riht? >> If so --with-openssl=/usr/local is what you want (the same prefix >> as used when installing OpenSSL). >> > >> > /usr/local/include/openssl/include/md5.h does not seem right by any >> standard.. >> > >> > Regards >> > Henrik >> >> >> ~~~~~~~~~~~~~~ >> John Peak >> [EMAIL PROTECTED] >> 678.575.2010 (c) >> 404.872.4622 (h) > -- > Henrik Nordstrom <[EMAIL PROTECTED]> > MARA Systems AB, Sweden ~~~~~~~~~~~~~~ John Peak [EMAIL PROTECTED] 678.575.2010 (c) 404.872.4622 (h)
