15 jun 2010 kl. 16.45 skrev Andrei Pelinescu-Onciul: > raw sockets: udp send will use now raw sockets if enabled > > A raw socket, that will be used for sending, is now initialized on > startup. The operation can succeed only if sr is started as root > or with CAP_NET_RAW. > If the initialization fails and the raw sockets are forced on from > the config (udp4_raw = 1), ser won't start. If the raw socket are > in auto mode (udp4_raw = -1), sr will start, but with the raw > socket send part disabled (normal udp send will be used). > > If the raw socket part is not disabled at startup, it can be > turned anytime on/off via the runtime cfg. framework. > > Note: the raw socket send is supported only over ipv4 and for now > only on linux.
Andrei, Can you explain the benefit of the raw sockets too? This sounds very interesting, but I don't see the reason why you want this. I am very curious! Thanks, /O _______________________________________________ sr-dev mailing list [email protected] http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
