Module: sip-router Branch: master Commit: 9b745fbb0a065cf30b8069e950b4e6e9f2d8b20c URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=9b745fbb0a065cf30b8069e950b4e6e9f2d8b20c
Author: Olle E. Johansson <[email protected]> Committer: Olle E. Johansson <[email protected]> Date: Sun Dec 23 10:17:36 2012 +0100 kamcmd Updating docs --- utils/sercmd/README | 103 +++++++++++++++++++++++++-------------------------- 1 files changed, 50 insertions(+), 53 deletions(-) diff --git a/utils/sercmd/README b/utils/sercmd/README index 1c9c823..b5005ef 100644 --- a/utils/sercmd/README +++ b/utils/sercmd/README @@ -8,24 +8,23 @@ Overview ======== -sercmd is a unix tool for interfacing with sip-router using ser exported RPCs. +kamcmd is a unix tool for interfacing with Kamailio using exported RPCs. It uses binrpc (a proprietary protocol, designed for minimal packet size and fast parsing) over a variety of transports (unix stream sockets, unix datagram sockets, udp or tcp). For more details on binrpc see the ctl module documentation -(modules_s/ctl/README). +(modules/ctl/README). -sercmd can work in command line mode (the RPC or command name is just another +kamcmd can work in command line mode (the RPC or command name is just another command line parameter) or in interactive mode. The interactive mode supports -history and tab-completion (if sercmd was compiled with libreadline support). - -On ser side the ctl module must be loaded. +history and tab-completion (if kamcmd was compiled with libreadline support). +On Kamailio side the ctl module must be loaded. Usage ===== - sercmd [options][-s address] [ cmd ] + kamcmd [options][-s address] [ cmd ] Options: -s address unix socket name or host name to send the commands on @@ -52,7 +51,7 @@ arg: string or number; to force a number to be interpreted as string prefix it by "s:", e.g. s:1 -If no address is specified (no -s), sercmd will use by default +If no address is specified (no -s), kamcmd will use by default unixs:/tmp/ser_ctl. This is also the default for the ctl module (if no "binrpc" module parameters are present in the config). @@ -60,54 +59,53 @@ unixs:/tmp/ser_ctl. This is also the default for the ctl module (if no Command Types ============= -There are 3 types of commands: "raw" ser RPC, sercmd aliases and sercmd +There are 3 types of commands: "raw" RPC, kamcmd aliases and kamcmd builtins. The "raw" RPC commands work directly with ser with no change on the input or the output. -All the RPCs can be seen using sercmd ls. +To list available RPC commands, use "kamcmd help". -The aliases are just other easier to remember names for some ser RPCs, which -some time include nicer formatting of the rpc result. -One can see all the defined aliases using: sercmd help|grep alias: . +The aliases are just easier to remember names for some RPCs, which +some time include nicer formatting of the RPC result. +One can see all the defined aliases using: kamcmd help|grep alias: . Example: ps is an alias for core.ps with the output formatted in a more readable way. - sercmd ps is equivalent to sercmd -f"%v\t%v\n" core.ps. - Without the formatting, the output of sercmd core.ps looks like: + kamcmd ps is equivalent to kamcmd -f"%v\t%v\n" core.ps. + Without the formatting, the output of kamcmd core.ps looks like: 11262 attendant 11268 udp receiver child=0 sock=127.0.0.1:5060 ... - Using sercmd ps (or sercmd -f"%v\t%v\n" core.ps) the output looks like: + Using kamcmd ps (or kamcmd -f"%v\t%v\n" core.ps) the output looks like: 11262 attendant 11268 udp receiver child=0 sock=127.0.0.1:5060 ... The built-in commands can combine several different rpcs. -One can see all the built-in commands using: sercmd help|grep builtin: . - +One can see all the built-in commands using: kamcmd help|grep builtin: . Getting help on a command ========================= To get the help message associated with a command use -sercmd help <command_name>. +kamcmd help <command_name>. Example: -$ sercmd help ps +$ kamcmd help ps ps is an alias for core.ps with reply formatting: "%v\t%v\n" -$ sercmd help core.ps -Returns the description of running SER processes. +$ kamcmd help core.ps +Returns the description of running Kamailio processes. Listing all the commands ======================== To see all the available commands (ser RPCs, aliases and bultins) use - sercmd help. -To see only the "raw" RPCs, user sercmd ls. + kamcmd help. +To see only the "raw" RPCs, user kamcmd ls. Note: since each module can define its own RPCs, the available RPCs depend on the loaded modules. @@ -117,7 +115,7 @@ Examples Using the default socket (requires only loadmodule "ctl" in ser.cfg): -$ sercmd ps +$ kamcmd ps 11262 attendant 11268 udp receiver child=0 sock=127.0.0.1:5060 11269 udp receiver child=1 sock=127.0.0.1:5060 @@ -130,25 +128,25 @@ $ sercmd ps 11276 tcp receiver child=1 11277 tcp main process -$ sercmd help # list all the supported commands +$ kamcmd help # list all the supported commands dst_blacklist.add ctl.who ... -$ sercmd help core.uptime # help for the core.uptime rpc -Returns uptime of SER server. +$ kamcmd help core.uptime # help for the core.uptime rpc +Returns uptime of the Kamailio server. -$ sercmd cfg.cfg_set_int_now debug 5 # turn debug level to 5 (needs cfg) +$ kamcmd cfg.cfg_set_int_now debug 5 # turn debug level to 5 (needs cfg) -$ sercmd # enters interactive mode +$ kamcmd # enters interactive mode Using a tcp socket -(assumes modparam("ctl", "binrpc", "tcp:localhost:2048") in ser.cfg) +(assumes modparam("ctl", "binrpc", "tcp:localhost:2048") in kamailio.cfg) -$ sercmd -s tcp:localhost:2048 core.version -Server: Sip EXpress router (2.1.0-dev23-make (i386/linux)) +$ kamcmd -s tcp:localhost:2048 core.version +Server: Kamailio (3.3.2 (i386/linux)) -$ sercmd -s tcp:localhost:2048 SRV _sip._udp.iptel.org +$ kamcmd -s tcp:localhost:2048 SRV _sip._udp.iptel.org name: _sip._udp.iptel.org type: SRV size (bytes): 104 @@ -163,33 +161,33 @@ $ sercmd -s tcp:localhost:2048 SRV _sip._udp.iptel.org rr expires in (s): 67693 rr error flags: 0 -sercmd -s tcp:127.0.0.1:2048 # enters interactive mode over tcp +kamcmd -s tcp:127.0.0.1:2048 # enters interactive mode over tcp -For more examples see utils/sercmd/EXAMPLES - [http://git.sip-router.org/cgi-bin/gitweb.cgi?p=sip-router;a=blob;f=utils/sercmd/EXAMPLES]. +For more examples see utils/kamcmd/EXAMPLES + [http://git.sip-router.org/cgi-bin/gitweb.cgi?p=sip-router;a=blob;f=utils/kamcmd/EXAMPLES]. Interactive Mode ================ -To enter the interactive mode start sercmd without specifying a command name +To enter the interactive mode start kamcmd without specifying a command name on the command line. -If sercmd was compiled with libreadline support (automatically if +If kamcmd was compiled with libreadline support (automatically if libreadline dev files are installed), the interactive mode will have tab completion and history support. Example: -$ sercmd -sercmd 0.1 +$ kamcmd +kamcmd 0.2 Copyright 2006 iptelorg GmbH This is free software with ABSOLUTELY NO WARRANTY. For details type `warranty'. -sercmd> core.s<tab> +kamcmd> core.s<tab> core.sctp_info core.sctp_options core.shmmem -sercmd> help core.shmmem +kamcmd> help core.shmmem Returns shared memory info. -sercmd> core.shmmem +kamcmd> core.shmmem { total: 33554432 free: 33147816 @@ -198,20 +196,19 @@ sercmd> core.shmmem max_used: 406616 fragments: 2 } -sercmd> quit +kamcmd> quit Related Stuff ============= +* ctl module: required, implements binrpc on Kamailio side, without it kamcmd doesn't work. -ctl module: required, implements binrpc on ser side, without it sercmd -doesn't work. -See modules_s/ctl/README +See modules/ctl/README [http://git.sip-router.org/cgi-bin/gitweb.cgi?p=sip-router;a=blob;f=modules_s/ctl/README]. -cfg_rpc module: allows setting or reading configuration parameters on-the-fly. -For example one could change the tcp connection lifetime to 180s using: -$ sercmd cfg.set_now_int tcp.connection_lifetime 180 -See modules_s/cfg_rpc/README - [http://git.sip-router.org/cgi-bin/gitweb.cgi?p=sip-router;a=blob;f=modules_s/cfg_rpc/README]. +* cfg_rpc module: allows setting or reading configuration parameters on-the-fly. + For example one could change the tcp connection lifetime to 180s using: + $ kamcmd cfg.set_now_int tcp.connection_lifetime 180 + See modules/cfg_rpc/README + [http://git.sip-router.org/cgi-bin/gitweb.cgi?p=sip-router;a=blob;f=modules_s/cfg_rpc/README]. _______________________________________________ sr-dev mailing list [email protected] http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
