> i would like to change mode 1 as follows:
>
> If set to 1 then this module will accept REGISTER requests that do not
> contain a Supported: header with the outbound options-tag. The 200 OK
> response to REGISTER requests that this module generates will contain a
> Require: or Supported: header with the outbound options tag
> depending on if REGISTER requests contain or do not contain,
> respectively, a Supported: header with the outbound options-tag.
the patch below implements this change. is it ok that i commit it (plus
the above change to README)?
-- juha
*** /usr/src/orig/sip-router/modules/registrar/reply.c 2013-02-06
10:56:37.000000000 +0200
--- reply.c 2013-03-09 10:25:15.000000000 +0200
***************
*** 658,668 ****
if (add_flow_timer(_m) < 0)
return -1;
}
- /* Fall-thru */
- case REG_OUTBOUND_SUPPORTED:
if (add_supported(_m, &outbound_str) < 0)
! return -1;
break;
}
break;
case R_OB_UNSUP:
--- 658,675 ----
if (add_flow_timer(_m) < 0)
return -1;
}
if (add_supported(_m, &outbound_str) < 0)
! return -1;
break;
+ case REG_OUTBOUND_SUPPORTED:
+ if ((parse_supported(_m) == 0) &&
+ (((struct supported_body
*)_m->supported->parsed)->supported_all & F_SUPPORTED_OUTBOUND)) {
+ if (add_require(_m, &outbound_str) < 0)
+ return -1;
+ }
+ if (add_supported(_m, &outbound_str) < 0)
+ return -1;
+ break;
}
break;
case R_OB_UNSUP:
_______________________________________________
sr-dev mailing list
[email protected]
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
