I tried quickly with a rtpengine that was not running, and kamailio started fine and then was responding fast for sip requests.
To clarify: you actually have more rtpengine configured (at least two) in a set and one is not available, right? Is the CPU usage very high? Because it is strange that is responding, but with long delay ... Cheers, Daniel On 25.12.18 00:34, Juha Heinanen wrote: > Daniel-Constantin Mierla writes: > >> Can you see the packet being sent over the network (with ngrep, tcpdump, >> ...)? > Yes, UDP register is sent, but kamailio does not respond to it. > > Then I did this. > > 1) Started K where rtpengine udp:192.26.134.10:6050 is enabled but is > not running. > > 2) Gave kamcmd command. It two about two minutes before I got the > prompt. > > 3) Gave 'rtpengine.show all' command. It took perhaps 30 seconds to > produce: > > { > url: udp:127.0.0.1:6050 > set: 0 > index: 0 > weight: 10 > disabled: 0 > recheck_ticks: 0 > } > { > url: udp:192.26.134.10:6050 > set: 0 > index: 2 > weight: 1 > disabled: 1 > recheck_ticks: 60 > } > { > url: udp:192.26.134.10:6050 > set: 1 > index: 1 > weight: 1 > disabled: 1(permanent) > recheck_ticks: N/A > } > > Now udp:192.26.134.10:6050 shows as disabled and kamailio started to > accept sip requests. > > How is it possible that one non-responding rtpengine can paralyze the > whole sip proxy? > > -- Juha -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC, USA -- www.asipto.com _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users