Hi Ovidiu Think I've cracked it. Thanks for your help!
Now to see if I can find a way to set the status when a phone subscribes. At the moment it only updates when a new call is made. Cheers Mark On 29 Nov 2012, at 19:57, Ovidiu Sas wrote: > You need to load pua_dialoginfo and configure the server accordingly: > http://kamailio.org/docs/modules/devel/modules_k/pua_dialoginfo.html > > Take a look at the overview section to have an idea about > notifications are triggered: > http://kamailio.org/docs/modules/devel/modules_k/presence_dialoginfo.html#id2544906 > > > -ovidiu > > On Thu, Nov 29, 2012 at 2:19 PM, Mark Boyce <m...@darkorigins.com> wrote: >> Hi Ovidiu >> >> I see the following; >> >> - Phone registers >> >> - Phone subscribes / Kamailio sends 200 OK >> >> - PBX immediately responds with a Notify / Phone sends 200 OK >> >> If I now make a call on the phone which is being watched by the >> subscription Kamailio doesn't generate any notify. >> >> Is there something I need to drop in the INVITE logic to trigger the notify? >> >> At the moment I'm loading presence.so and presence_dialoginfo.so modules >> with a config which is pretty much the same as the shipped sample config. >> >> Cheers >> >> Mark >> -- >> Mark Boyce >> >> >> >> On 29 Nov 2012, at 19:09, Ovidiu Sas wrote: >> >> Do you see a subscription from the phone? >> A SUBSCRIBE message being sent when the phone registers? >> >> -ovidiu >> >> On Thu, Nov 29, 2012 at 1:52 PM, Mark Boyce <m...@darkorigins.com> wrote: >> >> Hi All >> >> >> I'm slowly working out what goes where with this. So far I have; >> >> >> The Linksys / Cisco SCA / Shared Call Appearance requires Andrews SCA module >> >> not the standard presence ones. This is the feature on the phone which was >> >> generating the call-info events. >> >> >> With SCA turned off on the phones and Server Type set to RFC3265_4235 the >> >> phones are generating normal subscribe requests. >> >> >> Kamailio is logging the invites in the active_watchers table fine. >> >> >> >> The problem seems to be that nothing in the system actually generates the >> >> notify back to the phones when a call is made. >> >> >> From the docs it looks like presence_dialoginfo should be doing this but >> >> isn't. >> >> >> >> What have I missed? >> >> >> Cheers >> >> >> Mark >> >> -- >> >> Mark Boyce >> >> >> >> >> On 27 Nov 2012, at 19:44, Andrew Mortensen wrote: >> >> >> I recently added an SCA module to the project. If you're willing to try the >> >> master branch, I'd appreciate hearing how things work for you. >> >> >> Here are instructions for building from the git repository: >> >> >> http://www.kamailio.org/wiki/install/devel/git >> >> >> Add "sca" to the include_modules value in the make command, e.g.: >> >> >> make FLAVOUR=kamailio include_modules="db_mysql sca" >> >> >> Take a look at the documentation here (it's not up on kamailio.org yet): >> >> >> https://github.com/fitterhappier/sca >> >> >> Scroll down past the list of files to find the formatted README text. >> >> >> Best, >> >> andrew >> >> >> On Nov 27, 2012, at 12:32 PM, Mark Boyce <m...@darkorigins.com> wrote: >> >> >> Hi All, >> >> >> >> I've been trying to get some Cisco/Linksys SPA phones working with Kamailio >> >> (current stable). All seems to be ok apart from getting Presence/BLF/SCA >> >> working. >> >> >> >> The phones are set to >> >> >> Server_Type : RFC3265_4235 >> >> >> >> Line Key 2 Extension : Disabled >> >> >> Line Key 2 Share Call Appearance : Private >> >> >> Line Key 2 Extended Function : >> >> fnc=blf+sd+cp;sub=1...@ourserver.com;ext=1...@ourserver.com >> >> >> >> Where 1001 is the other phone. >> >> >> >> The phone appears to be sending event type 'call-info' rather than dialog >> >> etc. >> >> >> >> Phone is being sent '489 Bad Event' and the error in the logs is : presence >> >> [subscribe.c:1007]: Unsupported event header field value call-info >> >> >> >> Whatever I set the Server Type to on the phones it still tries to send >> >> call-info events on subscribes >> >> >> >> >> >> Has anyone got Presence working with Cisco SPA handset? >> >> >> >> >> The module needed seems to be available on OpenSIPs >> >> >> http://www.opensips.org/html/docs/modules/1.8.x/presence_callinfo.html >> >> >> >> >> Thanks! >> >> >> >> Mark > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
