Those warnings are SSH trying to backup your previous SSH installation
before installing the new one. No problems.
One of your systems is running SSH 1, which is not compatible with SSH 2.
Install the same SSH on both machines and your luck will improve. Also,
you can install SSH1, then install SSH2 - SSH2's ./configure step should
find the SSH1 installation and set itself automagically for both SSH1 and
SSH2 compatibility.
--
Gregor Mosheh
[EMAIL PROTECTED]
Systems Admin, Humboldt Internet
707.825.4638
On Mon, 27 Dec 1999, George Dimitoglou wrote:
> Dear SSH-ers-
>
> Platform: SUN Solaris 2.7
> SSH: 2.0.13
>
> Everything went well until 'make install' where I got the following
> errors. However they only look like warnings and no "show stoppers".
>
> :
> :
> Generating 1024-bit dsa key pair
> 13 ooOo.oOo.oOo
> Key generated.
> 1024-bit dsa hostkey
> Key is stored with NULL passphrase.
> Private key saved to /etc/ssh2/hostkey
> Public key saved to /etc/ssh2/hostkey.pub
> mv -f /usr/local/bin/ssh /usr/local/bin/ssh.old
> mv: cannot access /usr/local/bin/ssh
> *** Error code 2 (ignored)
> mv -f /usr/local/bin/ssh-agent /usr/local/bin/ssh-agent.old
> mv: cannot access /usr/local/bin/ssh-agent
> *** Error code 2 (ignored)
> mv -f /usr/local/bin/ssh-add /usr/local/bin/ssh-add.old
> mv: cannot access /usr/local/bin/ssh-add
> *** Error code 2 (ignored)
> mv -f /usr/local/bin/ssh-askpass /usr/local/bin/ssh-askpass.old
> mv: cannot access /usr/local/bin/ssh-askpass
> *** Error code 2 (ignored)
> mv -f /usr/local/bin/ssh-keygen /usr/local/bin/ssh-keygen.old
> mv: cannot access /usr/local/bin/ssh-keygen
> *** Error code 2 (ignored)
> mv -f /usr/local/bin/scp /usr/local/bin/scp.old
> mv -f /usr/local/bin/sftp /usr/local/bin/sftp.old
> mv -f /usr/local/bin/sftp-server /usr/local/bin/sftp-server.old
> mv -f /usr/local/bin/ssh-signer /usr/local/bin/ssh-signer.old
> mv: cannot access /usr/local/bin/ssh-signer
> *** Error code 2 (ignored)
> (cd /usr/local/bin && ln -s ssh2 ssh)
> (cd /usr/local/bin && ln -s ssh-agent2 ssh-agent)
> (cd /usr/local/bin && ln -s ssh-add2 ssh-add)
> (cd /usr/local/bin && ln -s ssh-askpass2 ssh-askpass)
> (cd /usr/local/bin && ln -s ssh-keygen2 ssh-keygen)
> (cd /usr/local/bin && ln -s scp2 scp)
> (cd /usr/local/bin && ln -s sftp2 sftp)
> (cd /usr/local/bin && ln -s sftp-server2 sftp-server)
> (cd /usr/local/bin && ln -s ssh-signer2 ssh-signer)
> mv -f /usr/local/sbin/sshd /usr/local/sbin/sshd.old
> mv: cannot access /usr/local/sbin/sshd
> *** Error code 2 (ignored)
> (cd /usr/local/sbin && ln -s sshd2 sshd)
> mv -f /usr/local/man/man1/ssh.1 /usr/local/man/man1/ssh.old.1
> mv: cannot access /usr/local/man/man1/ssh.1
> *** Error code 2 (ignored)
> mv -f /usr/local/man/man1/ssh-add.1 /usr/local/man/man1/ssh-add.old.1
> mv: cannot access /usr/local/man/man1/ssh-add.1
> *** Error code 2 (ignored)
> mv -f /usr/local/man/man1/ssh-agent.1 /usr/local/man/man1/ssh-agent.old.1
> mv: cannot access /usr/local/man/man1/ssh-agent.1
> *** Error code 2 (ignored)
> mv -f /usr/local/man/man1/ssh-keygen.1 /usr/local/man/man1/ssh-keygen.old.1
> mv: cannot access /usr/local/man/man1/ssh-keygen.1
> *** Error code 2 (ignored)
> mv -f /usr/local/man/man1/scp.1 /usr/local/man/man1/scp.old.1
> mv -f /usr/local/man/man1/sftp.1 /usr/local/man/man1/sftp.old.1
> (cd /usr/local/man/man1 && ln -s ssh2.1 ssh.1)
> (cd /usr/local/man/man1 && ln -s ssh-add2.1 ssh-add.1)
> (cd /usr/local/man/man1 && ln -s ssh-agent2.1 ssh-agent.1)
> (cd /usr/local/man/man1 && ln -s ssh-keygen2.1 ssh-keygen.1)
> (cd /usr/local/man/man1 && ln -s scp2.1 scp.1)
> (cd /usr/local/man/man1 && ln -s sftp2.1 sftp.1)
> mv -f /usr/local/man/man8/sshd.8 /usr/local/man/man8/sshd.old.8
> mv: cannot access /usr/local/man/man8/sshd.8
> *** Error code 2 (ignored)
> (cd /usr/local/man/man8 && ln -s sshd2.8 sshd.8)
> Installing /etc/ssh2/sshd2_config
> Installing /etc/ssh2/ssh2_config
>
>
> Then, when I start sshd, and I try to ssh to another system that has SSH running, I
>get the following:
>
> A# ssh -v <system> -l georged
> Development-time debugging not compiled in.
> To enable, configure with --enable-debug and recompile.
> debug: hostname is '<system>'.
> debug: Unable to open //.ssh2/ssh2_config
> Development-time debugging not compiled in.
> To enable, configure with --enable-debug and recompile.
> debug: connecting to <system>...
> debug: entering event loop
> debug: ssh_client_wrap: creating transport protocol
> debug: ssh_client_wrap: creating userauth protocol
> debug: client_disconnect: Illegal protocol version.
>
> Disconnected; protocol version not supported (Illegal protocol version.).
>
> When I try to ssh TO the system I put SSH on, I get:
> george@<system> ssh -v A -l george
> SSH Version 1.2.26 [alpha-dec-osf4.0], protocol version 1.5.
> Standard version. Does not use RSAREF.
> sohops.gsfc.nasa.gov: Reading configuration data /etc/ssh_config
> sohops.gsfc.nasa.gov: ssh_connect: getuid 1042 geteuid 0 anon 0
> sohops.gsfc.nasa.gov: Connecting to cdaw [xxx.xxx.xxx.176] port 22.
> sohops.gsfc.nasa.gov: Allocated local port 1023.
> sohops.gsfc.nasa.gov: Connection established.
> sohops.gsfc.nasa.gov: Remote protocol version 2.0, remote software version
>2.0.13 (non-commercial)
> sohops.gsfc.nasa.gov: Waiting for server public key.
> Connection closed by remote host.
>
>
>
> Any thoughts/help would be appreciated or any sites with configuration
> instructions. The ones I have visited till now are not helpful and only
> address problems with the 'configure' and 'make' scripts..Nothing about
> what to do afterwards.
>
> Thanks in advance for your help.
>
> --------------------------------------------------
> George Dimitoglou
> SM&A, Space Sciences Division
>
> SOHO ESA/NASA Project Scientist Team
> Laboratory of Astronomy & Solar Physics
> NASA Goddard Space Flight Center
> Bldg. 26, G-1, Code 682.3
> Greenbelt, MD 20771
>
> [EMAIL PROTECTED]
>
