Last Saturday the Dunkirk's lubricator blew out a soft-soldered joint because the lubricator got a lot hotter than my previous experiences with simple displacement lubricators. First the loco seemed to lose a bit of power: the regulator needed to be opened about 220 degrees (from closed) instead of only 130 degrees.
When the loco was stopped I noticed a puddle of steam oil at the base of the lubricator and droplets of oil on the steam line that exits from the lubricator. Later I saw that the oil puddle contained many, many tiny metal beads, which I assumed were solder. After disassembly a small hole was found in the joint where the steam line exits the lubricator body. (The steam line passes through the lubricator) My conclusion was that the solder softened and the steam pressure blew the hole in it. This is all no big deal, except it was curious that the solder formed all those tiny beads, which I take to mean that it was molten and not just softened. Also the solder was Alpha 2% silver / 98% tin, which has a nominal melting temperature of 430 degrees F. The steam line to the lubricator connected to the end of the superheater that exits from under the aft end of boiler through the firebox wall. The connection was a short length of silicone tubing, and there was about a 1/16" gap inside the tubing between the steam line and the end of the superheater. No metal-to-metal contact. Which means that either the silicone tube conducted enough heat to to the lubricator, or the steam was hot enough to do it. Quite a superheater I think. Next step is to rebuild the lubricator with silver brazed joints. Then test some more. Steve __________________________________________________________________ Switch to Netscape Internet Service. As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register Netscape. Just the Net You Need. New! Netscape Toolbar for Internet Explorer Search from anywhere on the Web and block those annoying pop-ups. Download now at http://channels.netscape.com/ns/search/install.jsp _______________________________________________ SSLiveSteam mailing list Send messages: [email protected] Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam Rules: http://www.45mm.com/sslivesteam_guide.html
