At 09:53 PM 4/7/06 -0400, you wrote:
>Next step is to rebuild the lubricator with silver brazed joints. Then
test some more. - Steve

Steve,
     Quite an experience.  I don't think I've seen solder "shot" created in
a loco before, especially one with flexible tubing in the system.
      I have a heads-up for you, when you go to rebuild the lubricator be
advised that silver solder will not flow where soft solder is present or
has been present unless every bit of soft solder is removed down to bright
metal.  If not it will be like trying to apply latex paint to an oily
surface and applying more of anything (flux, heat, solder) won't help the
situation.  I hate being the bearer of bad news but I thought I'd let you
know so you could take appropriate measures.


Regards,
Harry Wade
Nashville  Tennessee

_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to