Hello,
Am 27.11.24 um 09:34 schrieb Daniel Braniss:
Hi,
when the console is not uart0, init’s output, which I assume uses /dev/console
is lost. Boot, kernel and login work ok, also debugger.
you can give the loader a hint, which uart is considered a console.
In my case, any IPMI-console on uart1 works with the following settings
in /boot/loader.conf:
--
boot_multicons="yes"
comconsole_port="0x2f8"
hint.uart.0.flags="0x0"
hint.uart.1.flags="0x10"
hint.uart.1.baud="115200"
--
hint.uart.N.flags="0x10" means: this is a potential system console.
See uart(4) manpage for this.
regards,
Robert Schulze
