Hello Teemu Yes, the original plan was only to include sensor data. But that is easily mended, so the XEP could show both how to publish sensor data (based on XEP-0323), and how to publish control commands (based on XEP-0325). Would that be sufficient, or do you see more use cases you would like to include as well?
Best regards, Peter Waher From: Teemu Väisänen [mailto:[email protected]] Sent: den 23 april 2014 05:33 To: XMPP Standards Subject: Re: [Standards] UPDATED: XEP-0325 (Internet of Things - Control) Hi Peter. That description looks like the information goes from sensors to pubsub nodes and from there to subscribers. We have been using mostly SOX protoxep for that purpose.. I meant controlling, configuring, etc. sensors with pubsub. Should there be two different XEPs are will that one handle both "directions"? -Teemu 2014-04-21 17:55 GMT+03:00 Peter Waher <[email protected]<mailto:[email protected]>>: Hello Teemu I've on my to-do list a working item to write just such a document. It has been on the list for a while, and in XEP-0323 & 0325 it is called: xep-0000-IoT-PubSub Defines how efficient publication of sensor data can be made in sensor networks. But it seems to be the logical next step to write that document now... I'll write it and publish it to the list. Any comments and suggestions are welcome. Best regards, Peter Waher -----Original Message----- From: Teemu Väisänen [mailto:[email protected]<mailto:[email protected]>] Sent: den 20 april 2014 14:34 To: XMPP Standards Subject: Re: [Standards] UPDATED: XEP-0325 (Internet of Things - Control) Hi all. As Peter mentions in LinkedIn thread https://www.linkedin.com/groupItem?view=&item=5862110582659891202&type=member&gid=49429 "If you don't have the full JID of the sensor, you can publish a <set> command (XEP-0325) to a node on a pubsub server, instead of embedding it in a <message> or <iq> stanza to the sensor. If the sensor subscribes to the node, it will receive the set command and perform the action." Has anyone defined best practises for such or will them be defined in the next version of XEP-0325? I could see pubsub very useful in use cases when there are, e.g., one million sensors that require the same command to be executed as fast as possible. So they all just get the command from a pubsub node right after they come online, but what would be the best mechanism to tell this node to all the sensors? Happy Easter. -Teemu 2014-04-07 23:53 GMT+03:00 XMPP Extensions Editor <[email protected]<mailto:[email protected]>>: > Version 0.3 of XEP-0325 (Internet of Things - Control) has been released. > > Abstract: This specification describes how to control devices or actuators in > an XMPP-based sensor network. > > Changelog: [See revision history] (pw) > > Diff: http://xmpp.org/extensions/diff/api/xep/0325/diff/0.2/vs/0.3 > > URL: http://xmpp.org/extensions/xep-0325.html >
