Hi Patrick

To set up shop for hard stone carving  you want a fixed
installation of a heavy duty, low RPM compressor
especially if you  run more then one work station at
once.

  So anything from five horse power�s up with a large
tank will do the job.   A specially if you want to run
drilling and grinding tools  of it.  That consumes a lot
of air volume.

  Before you buy the equipment cross reference the tools
air volume requirements with  the compressors  volume
out put capacity.  Keep in mind  that running a
compressor at full capacity all the time results in
increased maintenance , repairs and burn out.  Run it
within 80% of its full capacity and it�ll last.  Draine
the water from the tank on regular bases.

  The shop I apprenticed in was equipped with a 6 horse
power electric compressor with a large tank. That
supplied 4 workstation without any difficulty.

Create a compressor room which keeps the dust out and
the noise within . To further increase the noise damming
effect clad the inside of this partition with egg
cartons or 2� foam mattresses.

   I run a portable compressor for the job site. One
horse power dual cylinder ,110 Volts on a 25 amp.
breaker.

  I use it mostly for light bushing hammer use  and  to
relief  stone from old cracked grout on masonry
restoration jobs.  I have done sculpting work in the
outdoors using a compressor of that size  but next time
I get something  more efficient.  If I do grinding work
I use electric tools since this size compressor lacks
the capacity to run heavy pneumatic grinding tools.

If you work granite indoors you need to manage the dust
with proper ventilation equipment.DO NOT compromise your
health by cutting this corner.  Silicosis kills slowly!
Plus wear dust masks.  This is like backing up a  cam
before a crux.  Sorry about the climbers lingo.

  Sandstone however is safest to work with when soaked
with water.  This keeps the dust almost completely out
of the air.  Note that this works with soft sandstones
because they are very absorbent.

Shop layout.
A personal thing indeed.  I like lots of natural light
from big windows.  Having light coming from the ceiling
is very beneficial also. High ceilings with stationary
block and tackle to lift things in to place and dollies
to move the weights around , or a gantry with which you
can serve the shop without having to move objects on the
floor.  The latter erlows for more flexibility on the
finish of the floor surface or the lack there off.

Cheers     Reto Mart  Vancouver B.C. Can.




....................................................................
Learning Stone is hosted free by Spunge.org (http://www.spunge.org).
For list info + help, including subscribe/unsubscribe options,
email message "intro stone" to [EMAIL PROTECTED]


Reply via email to