Hello, I recently substituted an LTO2 Ultrium tape library with a new LTO3, on a v20.
With the old device, I had to configure the sgen.conf to enable the changer device to be operated with mtx and bacula. Now, on reboot with the new device (with the /reconfigure), I found that the changer device (/dev/scsi/changer/c4t5d0) was still there, but a dead link. So I ran "devfsadm -C" and the device disappeared. Then I changed the sgen.conf to reflect as close as possible my configuration: device-type-config-list="changer"; inquiry-config-list = "CERTANCE", "ULTRIUM 3"; name="sgen" class="scsi" target=6 lun=0; but no changer device is appearing. What am I missing? Do i need to configure the dirver_aliases too? how? Please help! Gabriele. This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
