> What isn't working?

It was an error of mine.
Anyway I'm facing this strange situation with snv_60 (same server with S10U3 is 
fine):

SERVER141@/# iostat -XCMzxn 
                    extended device statistics
    r/s    w/s   Mr/s   Mw/s wait actv wsvc_t asvc_t  %w  %b device
   25.5   82.8    2.0    2.0  3.8  0.5   35.2    4.5   0  26 c0
    6.3   20.4    0.5    0.5  0.9  0.1   33.0    4.4   5   6 
c0t60001FE100118DB00009119074440070d0
   12.7   41.4    1.0    1.0  0.0  0.0    0.0    0.0   0   0 
c0t60001FE100118DB00009119074440070d0.fp0
   12.7   41.4    1.0    1.0  0.0  0.0    0.0    0.0   0   0 
c0t60001FE100118DB00009119074440070d0.fp1
    6.3   20.9    0.5    0.5  0.9  0.1   31.4    4.2   5   6 
c0t60001FE100118DB0000911907444006Fd0
    6.4   20.5    0.5    0.5  1.0  0.1   37.8    4.7   5   7 
c0t60001FE100118DB0000911907444006Ed0
    6.4   20.9    0.5    0.5  1.1  0.1   38.8    4.8   6   7 
c0t60001FE100118DB0000911907444006Dd0
    0.2    0.1    0.0    0.0  0.0  0.0    1.3    2.0   0   0 c2
    0.2    0.1    0.0    0.0  0.0  0.0    1.3    2.0   0   0 c2t0d0

SERVER141@/# /root/hba_inq -l|egrep c0t60001FE100118DB0000911907444006Dd0
  bus  3 target 73472 lun  75 
"/dev/rdsk/c0t60001FE100118DB0000911907444006Dd0s2"
  bus  4 target 73472 lun  75 
"/dev/rdsk/c0t60001FE100118DB0000911907444006Dd0s2"
SERVER141@/# /root/hba_inq -l|egrep c0t60001FE100118DB0000911907444006Ed0
  bus  3 target 73472 lun  76 
"/dev/rdsk/c0t60001FE100118DB0000911907444006Ed0s2"
  bus  4 target 73472 lun  76 
"/dev/rdsk/c0t60001FE100118DB0000911907444006Ed0s2"
SERVER141@/# /root/hba_inq -l|egrep c0t60001FE100118DB0000911907444006Fd0
  bus  3 target 139008 lun  75 
"/dev/rdsk/c0t60001FE100118DB0000911907444006Fd0s2"
  bus  4 target 139008 lun  75 
"/dev/rdsk/c0t60001FE100118DB0000911907444006Fd0s2"
SERVER141@/# /root/hba_inq -l|egrep c0t60001FE100118DB00009119074440070d0
  bus  3 target 139008 lun  76 
"/dev/rdsk/c0t60001FE100118DB00009119074440070d0s2"
  bus  4 target 139008 lun  76 
"/dev/rdsk/c0t60001FE100118DB00009119074440070d0s2"

It seems that only 1 disk is using multipath!
mpathadm says that all paths are ok:

# luxadm probe|egrep Log|sed -e s/.*\://|xargs -n1 mpathadm show lu |egrep State
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK
                Path State:  OK


gino
 
 
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss

Reply via email to