Hello Gino, Friday, April 6, 2007, 3:37:11 PM, you wrote:
>> What isn't working? G> It was an error of mine. G> Anyway I'm facing this strange situation with snv_60 (same server with S10U3 is fine): G> SERVER141@/# iostat -XCMzxn G> extended device statistics G> r/s w/s Mr/s Mw/s wait actv wsvc_t asvc_t %w %b device G> 25.5 82.8 2.0 2.0 3.8 0.5 35.2 4.5 0 26 c0 G> 6.3 20.4 0.5 0.5 0.9 0.1 33.0 4.4 5 6 G> c0t60001FE100118DB00009119074440070d0 G> 12.7 41.4 1.0 1.0 0.0 0.0 0.0 0.0 0 0 G> c0t60001FE100118DB00009119074440070d0.fp0 G> 12.7 41.4 1.0 1.0 0.0 0.0 0.0 0.0 0 0 G> c0t60001FE100118DB00009119074440070d0.fp1 G> 6.3 20.9 0.5 0.5 0.9 0.1 31.4 4.2 5 6 G> c0t60001FE100118DB0000911907444006Fd0 G> 6.4 20.5 0.5 0.5 1.0 0.1 37.8 4.7 5 7 G> c0t60001FE100118DB0000911907444006Ed0 G> 6.4 20.9 0.5 0.5 1.1 0.1 38.8 4.8 6 7 G> c0t60001FE100118DB0000911907444006Dd0 G> 0.2 0.1 0.0 0.0 0.0 0.0 1.3 2.0 0 0 c2 G> 0.2 0.1 0.0 0.0 0.0 0.0 1.3 2.0 0 0 c2t0d0 G> SERVER141@/# /root/hba_inq -l|egrep G> c0t60001FE100118DB0000911907444006Dd0 G> bus 3 target 73472 lun 75 G> "/dev/rdsk/c0t60001FE100118DB0000911907444006Dd0s2" G> bus 4 target 73472 lun 75 G> "/dev/rdsk/c0t60001FE100118DB0000911907444006Dd0s2" G> SERVER141@/# /root/hba_inq -l|egrep G> c0t60001FE100118DB0000911907444006Ed0 G> bus 3 target 73472 lun 76 G> "/dev/rdsk/c0t60001FE100118DB0000911907444006Ed0s2" G> bus 4 target 73472 lun 76 G> "/dev/rdsk/c0t60001FE100118DB0000911907444006Ed0s2" G> SERVER141@/# /root/hba_inq -l|egrep G> c0t60001FE100118DB0000911907444006Fd0 G> bus 3 target 139008 lun 75 G> "/dev/rdsk/c0t60001FE100118DB0000911907444006Fd0s2" G> bus 4 target 139008 lun 75 G> "/dev/rdsk/c0t60001FE100118DB0000911907444006Fd0s2" G> SERVER141@/# /root/hba_inq -l|egrep G> c0t60001FE100118DB00009119074440070d0 G> bus 3 target 139008 lun 76 G> "/dev/rdsk/c0t60001FE100118DB00009119074440070d0s2" G> bus 4 target 139008 lun 76 G> "/dev/rdsk/c0t60001FE100118DB00009119074440070d0s2" G> It seems that only 1 disk is using multipath! G> mpathadm says that all paths are ok: Why you say that? The output from hba_inq says that each disk is seen on two buses. Now I'm not sure why iostat doesn't give you fpN for each lun - try 'devfsadm -vC' -- Best regards, Robert mailto:[EMAIL PROTECTED] http://milek.blogspot.com _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
