Bruce, > Hi All, > > I'm busy testing/evaluating the iSCSI target on SXCE snv_b69 and I've > come across an issue of sorts, I'm not sure if this is something I'm > doing incorrectly, or if it is a known issue with the Solaris iSCSI > target. > > I have created a zpool mirror consisting of 2 x 500GB disks. This > zpool > is then split into 20GB z-vols with the "shareiscsi" option set to > "on". > > I too have 2 NIC's that have been configured in and active-active IPMP > configuration. I assign each logical address of the IPMP group to > their > own target portal group, both groups are then assigned to each > iscsi lun > so that there are 2 paths to each lun. > > This all appears to do what it says on the can up until I reboot the > box. After the reboot the target portal group tags have been removed > from the iscsi luns?! I have to manually assign the group tags every > time the system reboots. > > Is there a way that I can make this configuration static across > reboots.
When first using the iSCSI Target, one must setup a location for persistent storage of attributes. You can check this location with: # iscsitadm show admin If not set, one can be set with the following command: # iscsitadm modify admin -d /etc/iscsi/target or a directory of one's choosing. - Jim > > Here is an example of the commands I run to achieve what I am > trying to > explain: > > zpool create -m legacy data01 mirror c1t2d0 c1t3d0 > zfs create -V 20g -o shareiscsi=on data01/data01-000 > . > . > . > zfs create -V 20g -o shareiscsi=on data01/data01-009 > iscsitadm create tpgt 1 > iscsitadm create tpgt 2 > iscsitadm modify tpgt -i 192.168.10.50 1 > iscsitadm modify tpgt -i 192.168.10.51 2 > iscsitadm list tpgt -v > TPGT: 2 > IP Address: 192.168.10.51 > TPGT: 1 > IP Address: 192.168.10.50 > iscsitadm modify target -p 1 data01/data01-000 > iscsitadm modify target -p 2 data01/data01-000 > iscsitadm modify target -p 1 data01/data01-001 > iscsitadm modify target -p 2 data01/data01-001 > . > . > . > iscsitadm modify target -p 1 data01/data01-009 > iscsitadm modify target -p 2 data01/data01-009 > > iscsitadm list target -v data01/data01-000 > > Target: data01/data01-000 > iSCSI Name: iqn.1986-03.com.sun:02:46348385-5e43-c798-81ef- > ad4ea7526ca1 > Alias: data01/data01-000 > Connections: 0 > ACL list: > TPGT list: > TPGT: 1 > TPGT: 2 > LUN information: > LUN: 0 > GUID: 0x0 > VID: SUN > PID: SOLARIS > Type: disk > Size: 20G > Backing store: /dev/zvol/rdsk/data01/data01-000 > Status: online > > sync > sync > reboot > > iscsitadm list target -v data01/data01-000 > > Target: data01/data01-000 > iSCSI Name: iqn.1986-03.com.sun:02:46348385-5e43-c798-81ef- > ad4ea7526ca1 > Alias: data01/data01-000 > Connections: 0 > ACL list: > TPGT list: > LUN information: > LUN: 0 > GUID: 0x0 > VID: SUN > PID: SOLARIS > Type: disk > Size: 20G > Backing store: /dev/zvol/rdsk/data01/data01-000 > Status: online > > iscsitadm list tpgt -v > TPGT: 2 > IP Address: 192.168.10.51 > TPGT: 1 > IP Address: 192.168.10.50 > > after the reboot the lun has lost it's TPGT list (1 & 2)?! > > Is there something I am doing wrong here? > > Thanks > Bruce > > _______________________________________________ > storage-discuss mailing list > storage-discuss@opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/storage-discuss _______________________________________________ storage-discuss mailing list storage-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/storage-discuss
