Connect both cards to the primary controller on different ports and see what happens...
On 10/16/07, Srikanth, Ramana <[EMAIL PROTECTED]> wrote: > Oren, > You are seeing expected behavior, which is dependent on the type of the > array. > The 6140 is a ASYMMETRIC array with ACTIVE-STANDBY configuration. > The STANDBY path (will become ACTIVE and accept IOs) only when the > current ACTIVE path is down. > > I'm not sure about the model of the Equallogic array, but based on the > behavior, I guess the array is a SYMMETRIC device. > The symmetric device uses an ACTIVE-ACTIVE configuration where the IOs > are accepted on both the channels. > If you hook up the Equallogic array to Solaris (and the 6140 to Linus, > if Linux supports it) you should see the same array dependent behavior. > > Let us know if you get a chance. > > /Ramana > > I believe the Equallogic array is > > Oren Lion wrote: > > > >> Hi, > >> > >> I was surprised to observe only the primary MPxIO channel getting IOs (see > >> below iostat for fp0) while my expectation was to see IOs distributed > >> (round-robin) on both paths, fp0 and fp1, with higher throughput than IOs > >> only on single channel. > >> > >> As a sanity check to compare against iostat I ran Qlogic's SANsurfer GUI > >> tool to observe HBA performance, sure enough, only a single HBA was > >> servicing IO requests. > >> > >> Running a similar test on Linux against an EqualLogic array I observed > >> multipath sending IOs down multiple channels. > >> > >> Is my expectation with Solaris x86 MPxIO valid? > >> > >> Config: > >> V40z 8-core, 16 GB RAM, latest Recommended Patch (uname -a returns patch > >> level 127112-01) > >> 2x Sun StroageTek PCI-X (QLogic) 4Gb Single Port HBA > >> Sun 6140, 4GB cache, 16x 15K RPM drives, RAID 10 > >> > >> snippet /var/adm/messages > >> Oct 12 11:13:26 z8 genunix: [ID 834635 kern.info] /scsi_vhci/[EMAIL > >> PROTECTED] (sd19) multipath status: degraded, path /[EMAIL > >> PROTECTED],0/pci1022,[EMAIL PROTECTED]/pci1077,[EMAIL PROTECTED]/[EMAIL > >> PROTECTED],0 (fp1) to target address: w201400a0b82a3946,0 is standby Load > >> balancing: round-robin > >> Oct 12 11:13:26 z8 genunix: [ID 834635 kern.info] /scsi_vhci/[EMAIL > >> PROTECTED] (sd19) multipath status: optimal, path /[EMAIL > >> PROTECTED],0/pci1022,[EMAIL PROTECTED]/pci1077,[EMAIL PROTECTED]/[EMAIL > >> PROTECTED],0 (fp0) to target address: w201500a0b82a3946,0 is online Load > >> balancing: round-robin > >> > >> iostat -X 2 > >> > >> extended device statistics > >> device r/s w/s kr/s kw/s wait actv svc_t %w %b > >> sd3 0.0 77.5 0.0 51193.6 0.0 1.0 12.5 0 76 > >> sd4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 > >> sd5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 > >> sd6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 > >> sd19 58.5 0.0 50681.6 0.0 0.0 0.7 12.0 0 70 > >> sd19.fp1 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 > >> sd19.fp0 58.5 0.0 50681.6 0.0 0.0 0.0 0.0 0 0 > >> ses16.fp1 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 > >> ses17.fp0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 > >> extended device statistics > >> device r/s w/s kr/s kw/s wait actv svc_t %w %b > >> sd3 0.0 56.0 0.0 51204.8 0.0 0.7 12.4 0 69 > >> sd4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 > >> sd5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 > >> sd6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 > >> sd19 59.0 0.0 51204.8 0.0 0.0 0.7 11.8 0 69 > >> sd19.fp1 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 > >> sd19.fp0 59.0 0.0 51204.9 0.0 0.0 0.0 0.0 0 0 > >> ses16.fp1 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 > >> ses17.fp0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 > >> > >> > >> This message posted from opensolaris.org > >> _______________________________________________ > >> storage-discuss mailing list > >> [email protected] > >> http://mail.opensolaris.org/mailman/listinfo/storage-discuss > >> > >> > >> > _______________________________________________ > storage-discuss mailing list > [email protected] > http://mail.opensolaris.org/mailman/listinfo/storage-discuss > _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
