Hi Blake & All,
Thank you for your speedy reply.
The only errors I have are in the zpool status page, below:
bash-3.00# zpool status -x
pool: zbk
state: UNAVAIL
status: One or more devices could not be used because the label is missing
or invalid. There are insufficient replicas for the pool to continue
functioning.
action: Destroy and re-create the pool from a backup source.
see: http://www.sun.com/msg/ZFS-8000-5E
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
zbk UNAVAIL 0 0 0 insufficient replicas
raidz1 ONLINE 0 0 0
c2d0p2 ONLINE 0 0 0
c1d0 ONLINE 0 0 0
c1d1 ONLINE 0 0 0
raidz1 UNAVAIL 0 0 0 insufficient replicas
c7t0d0 ONLINE 0 0 0
c7t0d0 FAULTED 0 0 0 corrupted data
c7t0d0 FAULTED 0 0 0 corrupted data
There error columns all are zeros now, but there were WRITE errors on the two
drives tagged with "corrupted data". The error numbers were about 133 and 107
for each drive.
I was looking up on how to go read-only mode, but the pool is unavailable, and
therefore unmounted. Hopefully no further damage can come.
Does this info help?
Aaron
- Hide quoted text -
On Dec 30, 2007 12:01 AM, Blake Irvin <[EMAIL PROTECTED]> wrote:
I think a transcription of the errors you are seeing would be helpful
here. Also, remember that you can set your ZFS filesystems to be read-
only while you work to resolve this.
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
