Jim Dunham wrote:
> Karl Rossing wrote:
>> Jim Dunham wrote:
>>>> I managed to get LDOMS setup on a T1000.
>>>>
>>>> The disk that i'm presenting to the secondary AVS ldom is an svm 
>>>> volume (/dev/md/dsk/d20). Inside the ldom, the 
>>>> disk(/dev/md/dsk/d20) looks like /dev/dsk/c0d2s0.
>>>>
>>>> The secondary volume is now being replicated for the 1st time. The 
>>>> command i used was sndradm -m secondary:/dev/rdsk/c0d2s0.
>>>
>>> What does your replicated configuration look like?
>>>
>>> The reason that I am asking is the a complete SNDR replica consist 
>>> of the follow components.
>>>
>>>    primary host
>>>    primary device
>>>    primary bitmap
>>>    secondary host
>>>    secondary device
>>>    secondary bitmap
>>>    replication type (sync, or async)
>>>
>>> At enable time the command the must be invoked on both the primary 
>>> and secondary hosts, and looks something like this:
>>>
>>>    sndradm -e <phost> <pdev> <pbmp> <shost> <sdev> <sbmp> ip {sync | 
>>> async} [g <group>] [q <qdev>]
>>>
>> sndradm -e primary /dev/rdsk/c0d1s0 /dev/rdsk/c0d2s0 secondary 
>> /dev/rdsk/c0d2s0 /dev/rdsk/c0d3s0 ip async
>
> So, what happens when you invoke this SNDR command, of course the 
> first one two times, once one "primary" and once on "secondary"?
>
No problems. Everything gets setup.

>>
>>
>>> At update time
>>>
>>>    sndradm -m shost:sdev
This command dies after a while.
sndradm: warning: SNDR: Dual copy failed, offset:10002432

I'm going to try it with the database turned off on the primary and see 
if it gets farther.

It made it to 80% but now it's stopping at 97%

bash-3.00# dsstat
name              t  s    pct role   ckps   dkps   tps  svt
dev/rdsk/c0d2s0   P  L  97.62  net      0      0     0    0
dev/rdsk/c0d2s0                bmp      0      0     0    0


>> sndradm -m secondary:/dev/rdsk/c0d2s0
> How about the update command, or the following?
>
> sndradm -P
> sndradm -p
> dsstat
bash-3.00# sndradm -P
/dev/rdsk/c0d1s0        ->      wpg-srv3-ld2:/dev/rdsk/c0d2s0
autosync: off, max q writes: 4096, max q fbas: 16384, async threads: 2, 
mode: async, state: logging
bash-3.00# sndradm -p
/dev/rdsk/c0d1s0        ->      wpg-srv3-ld2:/dev/rdsk/c0d2s0
bash-3.00# dsstat
name              t  s    pct role   ckps   dkps   tps  svt
dev/rdsk/c0d2s0   P  L  97.62  net      0      0     0    0
dev/rdsk/c0d2s0                bmp      0      0     0    0





CONFIDENTIALITY NOTICE:  This communication (including all attachments) is
confidential and is intended for the use of the named addressee(s) only and
may contain information that is private, confidential, privileged, and
exempt from disclosure under law.  All rights to privilege are expressly
claimed and reserved and are not waived.  Any use, dissemination,
distribution, copying or disclosure of this message and any attachments, in
whole or in part, by anyone other than the intended recipient(s) is strictly
prohibited.  If you have received this communication in error, please notify
the sender immediately, delete this communication from all data storage
devices and destroy all hard copies.
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss

Reply via email to