I am attempting to do a proof of concept for Solaris 10 utilizing some discarded IBM-ESXS-ST373307FC (56 of them). I had an previous email about MPXIO which I got working, thank you. Here are the question I have, if this is the correct forum: 1) This is set up as a jbod and zfs , I would like to upgrade the firmware on these disks can anyone point me in the correct direction to do this? IBM wants you to be connected to a windows box with there hardware RAID controller in front of the disks. 2) Under load I keep getting errors for most all disks: Oct 6 15:51:59 v880 scsi: [ID 107833 kern.warning] WARNING: /scsi_vhci/[EMAIL PROTECTED] (ssd96): Oct 6 15:51:59 v880 Error for Command: write(10) Error Level: Retryable Oct 6 15:51:59 v880 scsi: [ID 107833 kern.notice] Requested Block: 28483632 Error Block: 28483632 Oct 6 15:51:59 v880 scsi: [ID 107833 kern.notice] Vendor: IBM-ESXS Serial Number: 3HZ0D7JF0916 Oct 6 15:51:59 v880 scsi: [ID 107833 kern.notice] Sense Key: Unit Attention Oct 6 15:51:59 v880 scsi: [ID 107833 kern.notice] ASC: 0x29 (power on, reset, or bus reset occurred), ASCQ: 0x0, FRU: 0x3
What recommendations can you offer and/or reference material I can look at. Thank you Allen Jasewicz Yazaki North America 6801 Haggerty Mail Stop 1408e Canton MI, 48187 734-983-1970
_______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
