Hi, We bought new storagetek 2530 array which is using SAS connecter. I am trying to configure this array with T5120 server and OS i am using Solaris 10 5/08.
Below are the packages i installed: SMagent-SOL-90[1].00.00.06.pkg SMruntime-SOL-10[1].10.02.00.pkg once after i installed the above packages i am getting below error "SANtricity Storage Array Host Agent, Version 90.00.00.06 Built Wed May 23 09:02:26 CDT 2007 Copyright (C) 1999-2007 LSI Logic Corporation. All rights reserved. Checking device /dev/rdsk/c1t0d0s2 : Skipping The SMagent service attempted to start but terminated. Possible causes include: [1] The access volume is disabled in NVSRAM. [2] No controllers with compatible firmware were found. [3] The default logical unit number (LUN) assigned to the access volume (typically 7 or 31) is not in the range supported by the host or is already in use by the host for another device. See your storage management documentation for more details. The Host Context Agent did NOT start because 0 controllers were found. Oct 9 19:51:10 proto-hd1 SMagent: The SMagent service attempted to start but terminated. Possible causes include: [1] The access volume is disabled in NVSRAM. [2] No controllers with compatible firmware were found. [3] The default logical unit number (LUN) assigned to the access volume (typically 7 or 31) is not in the range supported by the host or is already in use by the host for another device. See your storage management documentation for more details. Oct 9 19:51:10 proto-hd1 SMagent: The Host Context Agent did NOT start because 0 controllers were found." Please let me know is this is the corrct procedure or is there any other way to do this? Thanks, Raja -- This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
