Hi Gavin, Thank You for your reply. I could not able to find out correct procedure to configure 2530. This is the first time we bought 2530 array. I tried to check the URL which you have given, but it is not working. If you have any document or any other URL can you please send it to me.
I can able to see the storage array from CAM software, but i could not able to configure In-Band management. Thanks, Raja --- On Sat, 10/11/08, Gavin Gibson <[EMAIL PROTECTED]> wrote: > From: Gavin Gibson <[EMAIL PROTECTED]> > Subject: [storage-discuss] Storagetek 2530 In-Band management configuration > To: [EMAIL PROTECTED], [email protected], "CAM SUPPORT ALIAS" > <[EMAIL PROTECTED]> > Date: Saturday, October 11, 2008, 3:16 AM > Copying cam-support. > > > > Note: This is the correct procedure but the host has to > see the > storage prior to the agent starting. Some debug commands > are detailed > in the REAMDE files as well as the internal Wiki site. > > > > http://bldsrvr2.central/camwiki/index.php/InBand_Installation > > > > > > > > Subject: [storage-discuss] Storagetek 2530 In-Band > management > configuration > > > Date: Thu, 09 Oct 2008 21:08:11 -0700 (PDT) > > > From: raja <[EMAIL PROTECTED]> > > > To: [email protected] > > > > > > > > > Hi, > > > > > We bought new storagetek 2530 array which is using SAS > connecter. I > am trying to configure this array with T5120 server and OS > i am using > Solaris 10 5/08. > > Below are the packages i installed: > SMagent-SOL-90[1].00.00.06.pkg > > > SMruntime-SOL-10[1].10.02.00.pkg > > > > > once after i installed the above packages i am getting > below error > > > > > "SANtricity Storage Array Host Agent, Version > 90.00.00.06 > > > Built Wed May 23 09:02:26 CDT 2007 > > > Copyright (C) 1999-2007 LSI Logic Corporation. All rights > reserved. > > > Checking device /dev/rdsk/c1t0d0s2 : Skipping > > > > > The SMagent service attempted to start but terminated. > Possible > causes include: [1] The access volume is disabled in > NVSRAM. [2] No > controllers with compatible firmware were found. [3] The > default > logical unit number (LUN) assigned to the access volume > (typically 7 or > 31) is not in the range supported by the host or is already > in use by > the host for another device. See your storage management > documentation > for more details. > > > > > The Host Context Agent did NOT start because 0 controllers > were found. > > > > > Oct 9 19:51:10 proto-hd1 SMagent: The SMagent service > attempted to > start but terminated. Possible causes include: [1] The > access volume is > disabled in NVSRAM. [2] No controllers with compatible > firmware were > found. [3] The default logical unit number (LUN) assigned > to the access > volume (typically 7 or 31) is not in the range supported by > the host or > is already in use by the host for another device. See your > storage > management documentation for more details. > > > Oct 9 19:51:10 proto-hd1 SMagent: The Host Context Agent > did NOT start > because 0 controllers were found." > > > > > > > > > Please let me know is this is the corrct procedure or is > there any > other way to do this? > > > > > Thanks, > > > Raja > > > -- > > > This message posted from opensolaris.org > > > _______________________________________________ > > > storage-discuss mailing list > > > [email protected] > > > http://mail.opensolaris.org/mailman/listinfo/storage-discuss _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
