Zhong, The problem is that I'm using an older Nexus switch that only works with pre T11 frame format. Is there a way to modify this parameter in the driver to work with older format?
Thanks, Roy ________________________________ From: [email protected] [mailto:[email protected]] Sent: Wednesday, December 10, 2008 5:08 PM To: Hughes, Roy Cc: [email protected] Subject: Re: [storage-discuss] No Flogi Seen on Nexus Switch Hi Roy, Thanks for trying out Solaris FCoE software! [email protected]<mailto:[email protected]> wrote: Hi, I have configured a fcoe initiator using fcoe-nightly-nd-bins-20081121.i386.tar.bz2 build and connected to a Nexus switch but not seeing the WWN in the Nexus flogi database. The NIC is Intel 10G XF SR adapter, and I can ping other NICs connected to the Nexus switch. Is there a special switch setting required or is there a workaround to make this work. Which OpenSolaris release are you using with the FCoE initiator? Please run "mdb -k" as root and issue "*fcoe_trace_buf/s" and "::fptrace" on the FCoE initiator host, send me the output together with the running-config of your Nexus switch. I'll take a look to see what's going on. Any notes available for the SUNWfctl - leadville PLOGI to FCoE target issue workaround. You don't need that if you are testing FCoE to FCoE. But if you are using Leadville FC initiator, you need to apply the package on the initiator host, otherwise the FC initiator may not log in to FCoE nodes. Thanks & Regards, Zhong Thanks, Roy ________________________________ _______________________________________________ storage-discuss mailing list [email protected]<mailto:[email protected]> http://mail.opensolaris.org/mailman/listinfo/storage-discuss
_______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
