Is iSCSI loopback with the initiator and target supported on the same system. I thought that was fixed a while back. I have a clean snv_104 system installed. (We wanted to test the iSNS server and figured I would point the initiator and target at it to make sure things were working.)
The initiator was configured with isns enabled and 127.0.0.1 for the isns server. iscsitadm was used to create a basic 1G target. Then I used iscsitadm to enable isns and point to 127.0.0.1. Both the initiator and target appear in the iSNS BUI. So I create a ds and dd with the initiator and target. I ran devfsadm -i iscsi and in the iscsiadm list target I can see the local target appearing but I never get a connection between the two of them. The logs show. ... ISNS SCN register failed NOTICE: iscsi connection failed to set socket optionTCP_NODELAY, SO_RCVBU or SO_SNDBUF. NOTICE: iscsi connection(4) unable to connect to target iqn.... ... Just wondering... -- This message posted from opensolaris.org _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
