I have tested iSCSI in loopback configurations quite a bit on opensolaris, but never with iSNS. I don't know in what ways iSNS could complicate the picture...
(For what it is worth, iSCSI loopback is known NOT to work in S10.) David Weibel wrote: > Is iSCSI loopback with the initiator and target supported on the same > system. I thought that was fixed a while back. I have a clean snv_104 > system installed. (We wanted to test the iSNS server and figured I would > point the initiator and target at it to make sure things were working.) > > The initiator was configured with isns enabled and 127.0.0.1 for the > isns server. iscsitadm was used to create a basic 1G target. Then I > used iscsitadm to enable isns and point to 127.0.0.1. Both the initiator > and target appear in the iSNS BUI. So I create a ds and dd with the > initiator and target. I ran devfsadm -i iscsi and in the iscsiadm list target > I can see the local target appearing but I never get a connection between > the two of them. The logs show. > > ... > ISNS SCN register failed > NOTICE: iscsi connection failed to set socket optionTCP_NODELAY, > SO_RCVBU or SO_SNDBUF. > NOTICE: iscsi connection(4) unable to connect to target iqn.... > ... > > Just wondering... > _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
