I went with the "all hosts" configuration option on that page.
# stmfadm list-lu -v
LU Name: 600144F000144FF38FCE49EDD9630001
Operational Status: Online
Provider Name : sbd
Alias : /dev/zvol/rdsk/space/vol_1
View Entry Count : 1
LU Name: 600144F000144FF38FCE49EDDF700002
Operational Status: Online
Provider Name : sbd
Alias : /dev/zvol/rdsk/space/vol_2
View Entry Count : 1
LU Name: 600144F000144FF38FCE49EDDF740003
Operational Status: Online
Provider Name : sbd
Alias : /dev/zvol/rdsk/space/vol_3
View Entry Count : 1
LU Name: 600144F000144FF38FCE49EDDF770004
Operational Status: Online
Provider Name : sbd
Alias : /dev/zvol/rdsk/space/vol_4
View Entry Count : 1
LU Name: 600144F000144FF38FCE49EDDF790005
Operational Status: Online
Provider Name : sbd
Alias : /dev/zvol/rdsk/space/vol_5
View Entry Count : 1
I figured at that point I would get something in format. On the
discovery process, I'm less certain I'm ok. My format output does not
have a ibd0 interface in it. How does that get created?
John Forte wrote:
Michael Barrett wrote:
Where did I go wrong if, on my local host where the drives are
located, the format output does not show my iSCSI luns?
Did you create a view entry for the logical unit via stmfadm(1M)?
http://wikis.sun.com/display/OpenSolarisInfo/Making+SCSI+Logical+Units+Available
Is discovery properly configured and enabled on the iSCSI initiator?
- John
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
