I use smartctl, from the smartmontools package. i got it from blastwave. [r...@nas01 ~]# smartctl -d scsi -a /dev/rdsk/c0t0d0 smartctl version 5.36 [i386-pc-solaris2.8] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/
Device: ATA ST31500341AS Version: CC1H Serial number: 9VS13JQG Device type: disk Local Time is: Wed May 13 18:09:52 2009 PDT Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Current Drive Temperature: 45 C Error Counter logging not supported No self-tests have been logged [r...@nas01 ~]# works great. On Wed, May 13, 2009 at 6:05 PM, CF <[email protected]> wrote: > I've tried searching the forum and google, but nothing seems to solve this > trivial question. > > Format only lists > FORMAT MENU: > disk - select a disk > type - select (define) a disk type > partition - select (define) a partition table > current - describe the current disk > format - format and analyze the disk > fdisk - run the fdisk program > repair - repair a defective sector > show - translate a disk address > label - write label to the disk > analyze - surface analysis > defect - defect list management > backup - search for backup labels > verify - read and display labels > volname - set 8-character volume name > !<cmd> - execute <cmd>, then return > quit > None of these will tell me what I need to know. > How? > -- > This message posted from opensolaris.org > _______________________________________________ > storage-discuss mailing list > [email protected] > http://mail.opensolaris.org/mailman/listinfo/storage-discuss > _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
