I have upgraded to snv_129 and my dual port LP9002-DC is only showing up in the
initiator mode. I would really appreciate if someone could please help me to
get this HBA to work in target mode. Here is the relevant info (please let me
know if you need anything else):
Emulex driver config (driver version used is 2.50i):
r...@opensolaris:~# grep -P "^[^#/\s]" /kernel/drv/emlxs.conf
console-notices=0;
console-warnings=0;
console-errors=0;
log-notices=0xffffffff;
log-warnings=0xffffffff;
log-errors=0xffffffff;
num-iocbs=1024;
max-xfer-size=339968;
ub-bufs=1000;
network-on=1;
topology=0;
link-speed=0;
ack0=0;
cr-delay=0;
cr-count=1;
assign-alpa=0x00;
adisc-support=1;
pm-support=0;
num-nodes=0;
linkup-delay=10;
enable-npiv=0;
vport-restrict-login=1;
enable-auth=0;
target-mode=1;
ddi-forceattach=1;
r...@opensolaris:~# fcinfo hba-port
HBA Port WWN: 10000000c9328448
Port Mode: Initiator
Port ID: 0
OS Device Name: /dev/cfg/c7
Manufacturer: Emulex
Model: LP9002L
Firmware Version: 3.93a0 (C2D3.93A0)
FCode/BIOS Version: Boot:5.00a5
Serial Number: 0000C9328448
Driver Name: emlxs
Driver Version: 2.50i (2009.11.10.12.30)
Type: unknown
State: offline
Supported Speeds: 1Gb 2Gb
Current Speed: not established
Node WWN: 20000000c9328448
NPIV Not Supported
HBA Port WWN: 10000000c9328447
Port Mode: Initiator
Port ID: 0
OS Device Name: /dev/cfg/c6
Manufacturer: Emulex
Model: LP9002L
Firmware Version: 3.93a0 (C2D3.93A0)
FCode/BIOS Version: Boot:5.00a5
Serial Number: 0000C9328447
Driver Name: emlxs
Driver Version: 2.50i (2009.11.10.12.30)
Type: unknown
State: offline
Supported Speeds: 1Gb 2Gb
Current Speed: not established
Node WWN: 20000000c9328447
NPIV Not Supported
r...@opensolaris:~# dmesg|grep emlxs
Dec 14 01:39:21 opensolaris emlxs: [ID 709872 kern.warning] WARNING: emlxs:
ddi_modopen drv/fct failed: err 2
Dec 14 01:39:25 opensolaris pcplusmp: [ID 805372 kern.info] pcplusmp:
pci10df,f900 (emlxs) instance 0 irq 0x10 vector 0x42 ioapic 0x4 intin 0x10 is
bound to cpu 1
Dec 14 01:39:35 opensolaris emlxs: [ID 349649 kern.info] [ 6.0ABE]emlxs0:
NOTICE:1502: Firmware Library (LP10000-S: v1.92a1 (td192a1.all))
Dec 14 01:39:35 opensolaris emlxs: [ID 349649 kern.info] [ 6.0ABE]emlxs0:
NOTICE:1502: Firmware Library (LP11000-S: v2.82a4 (bd282a4.all))
Dec 14 01:39:35 opensolaris emlxs: [ID 349649 kern.info] [ 6.0ABE]emlxs0:
NOTICE:1502: Firmware Library (LP11002-S: v2.82a4 (bf282a4.all))
Dec 14 01:39:35 opensolaris emlxs: [ID 349649 kern.info] [ 6.0ABE]emlxs0:
NOTICE:1502: Firmware Library (LPe11000-S: v2.82a4 (zd282a4.all))
Dec 14 01:39:35 opensolaris emlxs: [ID 349649 kern.info] [ 6.0ABE]emlxs0:
NOTICE:1502: Firmware Library (LPe11002-S: v2.82a4 (zf282a4.all))
Dec 14 01:39:35 opensolaris emlxs: [ID 349649 kern.info] [ 6.0ABE]emlxs0:
NOTICE:1502: Firmware Library (LPe12000-S: v1.11a5 (ud111a5.all))
Dec 14 01:39:35 opensolaris emlxs: [ID 349649 kern.info] [ B.1732]emlxs0:
NOTICE: 100: Driver attach. (Emulex-S s11-64 i386 v2.50i (2009.11.10.12.30))
Dec 14 01:39:35 opensolaris emlxs: [ID 349649 kern.info] [ B.1735]emlxs0:
NOTICE: 100: Driver attach. (LP9002L Dev_id:f900 Sub_id:f900 Id:5)
Dec 14 01:39:35 opensolaris emlxs: [ID 349649 kern.info] [ B.173C]emlxs0:
NOTICE: 100: Driver attach. (Firmware:3.93a0 (C2D3.93A0) Boot:5.00a5)
Dec 14 01:39:35 opensolaris emlxs: [ID 349649 kern.info] [ B.176B]emlxs0:
NOTICE: 100: Driver attach. (SLI:2 MSI:0 NPIV:0 FCA)
Dec 14 01:39:35 opensolaris emlxs: [ID 349649 kern.info] [ B.1771]emlxs0:
NOTICE: 100: Driver attach. (WWPN:10000000C9328447 WWNN:20000000C9328447)
Dec 14 01:39:35 opensolaris pci_pci: [ID 370704 kern.info] PCI-device:
pci10df,f...@4, emlxs0
Dec 14 01:39:35 opensolaris genunix: [ID 936769 kern.info] emlxs0 is
/p...@0,0/pci10de,7...@8/pci8086,b...@8/pci10df,f...@4
Dec 14 01:39:35 opensolaris emlxs: [ID 709872 kern.warning] WARNING: emlxs:
ddi_modopen drv/fct failed: err 2
Dec 14 01:39:38 opensolaris pcplusmp: [ID 805372 kern.info] pcplusmp:
pci10df,f900 (emlxs) instance 1 irq 0x11 vector 0x43 ioapic 0x4 intin 0x11 is
bound to cpu 0
Dec 14 01:39:48 opensolaris emlxs: [ID 349649 kern.info] [ B.1732]emlxs1:
NOTICE: 100: Driver attach. (Emulex-S s11-64 i386 v2.50i (2009.11.10.12.30))
Dec 14 01:39:48 opensolaris emlxs: [ID 349649 kern.info] [ B.1735]emlxs1:
NOTICE: 100: Driver attach. (LP9002L Dev_id:f900 Sub_id:f900 Id:5)
Dec 14 01:39:48 opensolaris emlxs: [ID 349649 kern.info] [ B.173C]emlxs1:
NOTICE: 100: Driver attach. (Firmware:3.93a0 (C2D3.93A0) Boot:5.00a5)
Dec 14 01:39:48 opensolaris emlxs: [ID 349649 kern.info] [ B.176B]emlxs1:
NOTICE: 100: Driver attach. (SLI:2 MSI:0 NPIV:0 FCA)
Dec 14 01:39:48 opensolaris emlxs: [ID 349649 kern.info] [ B.1771]emlxs1:
NOTICE: 100: Driver attach. (WWPN:10000000C9328448 WWNN:20000000C9328448)
Dec 14 01:39:48 opensolaris pci_pci: [ID 370704 kern.info] PCI-device:
pci10df,f...@5, emlxs1
Dec 14 01:39:48 opensolaris genunix: [ID 936769 kern.info] emlxs1 is
/p...@0,0/pci10de,7...@8/pci8086,b...@8/pci10df,f...@5
r...@opensolaris:~# modinfo |grep emlxs
140 fffffffff8590000 b6e90 261 1 emlxs (SunFC emlxs FCA v20091110-2.50i)
I am still getting warning: "emlxs: ddi_modopen drv/fct failed: err 2", I was
told that will be fixed in snv_129. As you can see it looks like that the
driver attaches properly, the driver is also installed, driver config should be
configured for target mode, but still target mode doesn't work. Is there
anything else that I need to do in driver config or somewhere else to get
target mode on this HBA to work?
--
This message posted from opensolaris.org
_______________________________________________
storage-discuss mailing list
storage-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
